ASSEMBLY
Warning! Before assembly, remove the battery pack from the tool.
Fig.B
Fitting and removing the battery (Fig.B)
Your hedge trimmer is equipped with a battery pack, which powers the
unit.
To fit battery pack
1. Place battery pack in your hedge trimmer. Align raised rib on battery
pack with groove inside hedge trimmer. See Figure B.
2. Make sure the latches on each side of your battery pack snap in
place and battery pack secured in hedge trimmer before beginning
operation.
To remove battery pack
1.Locate latches on end of battery pack and depress to release battery
pack from your hedge trimmer.
2. Remove battery pack from your hedge trimmer. See Figure B.
USE
Let the tool work at its own pace.
Do not overload.
To Next Page
Loading...
