B. Your operating system is sending a longer / shorter label to NT-LP110A.
Please ensure you have choose the correct label size:
①For Windows
Please go to Control Panel -> Devices and Printers -> Right Click on NT-LP110A -> Printer
Preferences -> Advanced Button.
Most 4 x 6 labels are 100mm x 150mm, if you can’t find the command paper in it, you can please add a
new lable size.
②
For Mac
Please select 100mm x 150mm or 4" x 6" size during on the print prompt window
Note: The application you are using (i.e. Adobe Reader) could be over-riding your driver label setting
and sending the print in a larger / smaller size to NT-LP110A. Look for "Page Setup" or "Paper Size" in
the print prompt and ensure it already set to the size you want.
(6) Q: Why the printer print extra blank labels after printing?
A. Please check the “Type” of the Media Settings; choose “Label with Gaps”
B. 1. Please check if the page size set in the driver matched the size of the labels that using in the
printer.
①Windows: Control Panel > Devices and Printers > Right click on NT-LP110A > Printer
Preferences > Page Setup
for the printer(If you are using 4x6 paper, please select the 100*150mm)
To Next Page
Loading...
