(8) Q: Why the printer’s button is flashing?
A. Red light is an indication that NT-LP110A has a problem with your label. Most likely, the printer
needs to re-identify your label.
Please ensure there are multiple labels available to the printer and then run the automatic label
identification. Simply press and hold the top button on NY-LP110A until you hear one beep. The printer
will then feed labels back and forth to learn the gap and other properties of your labels.
If automatic label identification does not work or red light remain, please turn off the printer by using
the power switch on the back and turn the unit back on.
(9) Q: Why my label is printing sideways?
A. The most likely reason is that your label is not properly formatted for 4 x 6 label printing.
NT-LP110A prints what you see on your screen in the same orientation. So if the label looks side-ways
on your screen or if it has a lot of white space around the label, the printer will print it side-ways with
the same amount of white space.
If your label is 4 x 6 but just provided sideways, you can setup to rotate automatically:
On Mac
During the print prompt, select your label size under Presets, then navigate to Printer Features -> Page
Options and Select 90 under "Rotate."
To Next Page
Loading...
