3
I. Prologue
Thanks for using air source heat pump water heater! Please read this manual carefully before installation
and operation. There are information for installation, operation, maintenance, commissioning.
High design and production standard make sure air source heat pump water heater running safely and
efficient as well as excellent reliability and adaptability.
We will not responsible for any loss caused by any nonstandard operation.
The machine should be installed by qualified professional personnel and must be connected according to
the circuit diagram on the machine. The following items should be focused.
1. Before installation, please confirm if your local voltage is match with the voltage showed on the machine’s
nameplate and if the carrying capacity of the power supply, wires and sockets are suitable for this machine’s
input power.
2. Users are not allowed to change the power cord or socket. Wiring work must be carried out by a qualified
electrician and ensure that the metal part of the machine has a good grounding. Changing the ground mode
is strictly forbidden.
3. After the completion of the construction of all wiring work, please make sure to recheck everything is well
before power on.
4. Installing the machine in the place which the combustible gas may leak is strictly forbidden.
5. Do not put your hands or foreign objects into the air outlet of heat pump unit, otherwise, it will be dangerous
to the people and equipment
6. In order to obtain a better energy-saving effect, the unit should be installed in a place with well-ventilated.
7. Water used for this machine must be accordance with the national standard of living water, otherwise, if the
machine is damaged, we will not assume any responsibility.
To Next Page
Loading...
Need help?
General
