New England Arbors Cardiff Planter Box User Manual

1. Pre-Assembled Side Wall Panels (2) - 10812
2. Pre-Assembled Front & Back Wall Panels with Posts Connected (2) - 10811
3. Post Caps (4) - 10810
4. Floor Boards (3) - 10813
5. Base Trim (4) - 10730-1
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components,
place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 4’x 8’ (1.2 m x 2.4 m) for unobstructed assembling.
• You should not need to use excessive force when assembling components.
The Cardi Planter Box
Please read through before starting assembly.
Chec
k Box for These Contents
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
(UK Tel: (44) 2038 687160 (Mon. to Fri. 8~1:00 PM to 10:00 PM GMT).
ASSEMBLY INSTRUCTIONS
1
1
4
3
2
V1.3/072417
15.75 in
40 cm
15 in
38 cm
12 in
30.5 cm
13.75 in
35 cm
16 in
41 cm
16 in
41 cm
5
www.newenglandarbors.com
www.newenglandarbors.co.uk

New England Arbors Cardiff Planter Box Specifications

General

Brand	New England Arbors
Model	Cardiff Planter Box
Category	Lawn and Garden Equipment
Language	English

Summary

Check Box for Contents

General Information

STEP ONE: Connect Walls

Lay Out Front Wall Panel

Position the front wall panel on the work surface for assembly.

Insert Side Walls

Insert side walls into routed holes on front panel posts until rails bottom out.

Insert Floor Boards

Place the three floor boards into the pre-routed holes.

Align and Insert Back Panel

Align and insert the pre-assembled back panel, ensuring bottom slats fit.

STEP TWO: Install Post Caps

Install Post Caps and Base Trims

Attach the four post caps and base trims until locking tabs snap into place.