EasyManua.ls Logo

New England Arbors Cambridge User Manual

New England Arbors Cambridge
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Check Box for These Contents
In the event of missing or defective parts please call our customer service dept. at
1 800 282 9346
(Mon. to Fri. 8:00 AM to 4:00 PM EST) .
(UK Tel: (44) 2038 687160 - Mon. to Fri. 1:00 PM to 10:00 PM GMT).
General Information
Read Instructions through
carefully before beginning assembly.
When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
We recommend an area approx 4’x 8’(1.2 m x 2.4 m) for unobstructed assembling.
You should not need to use excessive force when assembling components.
The Cambridge Raised Planter Box
Please read through before starting assembly.
ASSEMBLY INSTRUCTIONS
7
1
Not to Scale
1
4
3
2
Ver 3.6/072617
5
6
www.newenglandarbors.com
www.newenglandarbors.co.uk
1. Pre-Assembled Side Wall Panels with Posts Connected (2) - 10873
2. Floor Panels (4) - 10871
3. Floor Support (1) - 10872
4.
Front and Back Wall Panels
(2) - 10870
5. Pre-assembled Shelf (1) - 10874
6. Post Caps (4) - 10611
7. 5/8” (1.6 cm) Stainless Steel Screws (12) - 20016
8. 1 1/2” (4 cm) Stainless Steel Screws (8) - 20005
8
Planter Box Dimensions are 32”L x 20”W x 10”D (81 cm L x 51 cm W x 25 cm D)
(± 3.7 cubic feet (0.1 cubic Meter) / 0.14 cubic yards / 105 litres)
90 cm
91 cm
61 cm
15 cm
Question and Answer IconNeed help?

Do you have a question about the New England Arbors Cambridge and is the answer not in the manual?

New England Arbors Cambridge Specifications

General IconGeneral
BrandNew England Arbors
ModelCambridge
CategoryLawn and Garden Equipment
LanguageEnglish

Summary

Assembly Instructions

Check Box for These Contents

Lists all components included in the planter box kit for verification.

General Information

Provides essential tips for assembling the planter box safely and correctly.

Step One: Initial Assembly

Assembles the side walls, shelf, and front/back panels of the planter box.

Step One (Cont'd): Panel Fastening

Secures wall panels and corner brackets using specified screws.

Step Two: Floor and Cap Installation

Installs floor panels onto supports and attaches post caps.

Related product manuals