New England Arbors Cottage Picket Wings User Manual

Check Box for These Contents (1 Box)
In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
1. Posts (2) 4”x 4“ x 54” - 10126
2. Top Rails (2) 2“ x 3.5” x 44.5“ - 10103
3. Bottom Rails (2) 2“ x 3.5” x 43.5“ - 10104
4. Pickets (4) .875“ x 3” x 29.25“ - 10105
Pickets (2) .875“ x 3” x 30“ - 10107
Pickets (2) .875“ x 3” x 31.5“ - 10108
Pickets (2) .875“ x 3” x 32.75“ - 10109
Pickets (2) .875“ x 3” x 34.25“ - 10110
Pickets (2) .875“ x 3” x 36.25“ - 10111
Pickets (2) .875“ x 3” x 38.25“ - 10112
Pickets (2) .875“ x 3” x 41“ - 10113
5. External Post Caps (2) 4” x 4” - 10735-1
6. Post Trim Caps (2) 4” x 4” - 10737-1
7. Base Moldings (2) 5” x 5” - BM20022
8. Rail Mount Brackets (8) 2” x 3.5” - 10045
Hardware Kit (Includes):
9. Self-tapping stainless Screws (32) .625” - 20016
10. Rail end spacers (2) 2“ x 3.5” x .5” - 10217
11. Tube of vinyl cement (1) - 20000
Tools You Will Need
• Cordless Drill with #2 Phillips bit
• Tape measure
• Pencil
• Level
• Shovel
• Two bags of pre-mix concrete (optional)
General Information
• Read Instructions through carefully before beginning assembly.
• When handling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 5’x 5’ for unobstructed handling.
Cottage Picket Wings
Please read through before starting assembly.
ASSEMBLY INSTRUCTIONS
1
1
V2.4/091916
9
Not to Scale
2
11
3
4
8
5
6
7
10
5" 5"
8"
39"
49"
18.75"
44"
www.newenglandarbors.com

New England Arbors Cottage Picket Wings Specifications

General

Brand	New England Arbors
Model	Cottage Picket Wings
Category	Lawn and Garden Equipment
Language	English

Summary

Product Contents and Preparation

Check Box for Contents

Lists all parts included in the assembly kit for the Cottage Picket Wings.

Tools Required for Assembly

Details the necessary tools for assembling the Cottage Picket Wings.

General Assembly Information

Provides essential guidelines and recommendations before starting assembly.

Step One: Post Preparation

Attach Rail Mount Brackets to Posts

Instructions for attaching rail mount brackets to the posts at specific measurements.

Attach Base Molding and Second Bracket

Guide on fitting base molding and a second rail bracket to the post.

Step Two: Rail and Picket Installation

Insert Bottom and Top Rails

Procedure for inserting the bottom and top rails into the post brackets.

Install Pickets

Instructions for installing pickets into the rails in a specific order.

Step Three: Attaching Wings to Arbor

Mount Brackets on Arbor

Details on fastening rail mount brackets to the arbor side panel.

Mark and Dig Holes for Posts

Guides on marking and digging holes for wing posts based on bracket distance.

Step Four: Final Assembly and Securing

Position Wing Posts and Secure Rails

Instructions for lowering wing posts into holes and securing rails to arbor.

Apply Vinyl Glue and Install Caps

Guidance on applying vinyl glue and fitting trim and post caps.