How to fix an irregular cut with my New Holland Lawn Mower?
An irregular cut from your New Holland Lawn Mower can stem from a few issues. Ensure the mower frame is level; if not, level it. Slow down your mowing speed. Check the blades; if they are blunt, grind them, or if worn out, replace them. Make sure your tires are inflated to the specified pressure. Lastly, adjust the anti-scalp rollers if they are not properly set.
Why is my New Holland Lawn Mower leaving strips of uncut grass?
If your New Holland Lawn Mower is leaving strips of uncut grass, it could be due to several reasons. You might be moving too fast, so try slowing down. Alternatively, the engine speed could be too low; mow at full speed and check/adjust the engine speed. If the grass is too long, cut it twice. Also, check if the blades are blunt or damaged, and replace or grind them if needed. Finally, debris in the mower frame can cause this issue, so clean up the mower frame.
What to do if my New Holland 266WMM Lawn Mower has obstructed discharge?
If your New Holland Lawn Mower has obstructed discharge, it could be due to several factors. The grass might be too wet, so wait for it to dry. The grass might be too long, so raise the cutting height and mow twice. The cutting height could be too low, so raise it. The engine speed might be too low, so mow at maximum speed. Finally, you might be moving too fast, so slow down.
General| Brand | New Holland |
|---|---|
| Model | 266WMM |
| Category | Lawn Mower |
| Language | English |
Guidance for owners on operating and maintaining the equipment safely.
Explains safety symbols, warnings, and manual direction conventions.
Critical safety rules for children and essential pre-operation checks.
Safety precautions to follow while operating the machine and implement.
Safety guidelines for maintenance, startup, and fire prevention measures.
Key safety rules for operating the machine, including hydraulic and electrical safety.
Details on mower deck construction, dimensions, and drive components.
Illustrates safety label locations and their associated hazard warnings.
Provides estimated times for assembly and lists necessary tools and materials.
Guides for installing 3-point hitch pins, lifting pivots, and mower brackets.
Procedures for installing middle supports on tractors with or without front loaders.
Steps for connecting lifting arms and the driveline to the tractor.
Pre-operation checks, control familiarization, and engagement procedures.
Procedures for sharpening, balancing, and replacing mower blades.
Instructions for belt replacement and adjusting belt tension and cutting height.
Schedule for lubrication and guide for resolving common operational issues.
List and diagrams of parts for the underside of the mower deck.
List and diagrams of parts for the upper section of the mower deck.
Parts list and diagrams for the front hitch assembly.
Parts list and diagrams for the rear hitch assembly.
Parts list and diagrams for the mower's drive system.
Parts lists and diagrams for wheels, spindle, and driveline.
Reference for standard torque values for various fasteners and bolt identification.
To Next Page