This document is an Operator's Manual for the New Holland MZ17H riding mower, identified by part number 87369217 and dated 11/2005. The manual provides comprehensive instructions for the safe operation, maintenance, and troubleshooting of the MZ17H model.
Function Description:
The New Holland MZ17H is a riding lawn mower designed for cutting grass. It is equipped with an engine that powers the cutting blades and provides propulsion. The machine is intended for outdoor use on various terrains, with specific warnings and guidelines for slope operation. Its primary function is to efficiently and safely maintain lawns and other grass-covered areas. The mower features a discharge opening for cut grass, and operators are cautioned to ensure the grass catcher or guard is in place during operation.
Important Technical Specifications (Derived from the manual's content):
- Model: MZ17H
- Engine Horsepower: The manual notes that for models with stated engine horsepower, the gross horsepower was laboratory rated by the engine manufacturer in accordance with SAE J1940. However, the actual engine horsepower on this class of lawn mower will be significantly lower due to configuration for safety, emission, and operating requirements.
- Spark Ignition System: Complies with Canadian ICES-002.
- Safety Standards: Meets or exceeds B71.1-2003 specifications of the American National Standards Institute.
- Slope Operation: Not recommended for slopes greater than 15 degrees. A slope chart is provided to help operators identify safe operating angles (5°, 10°, 15° slopes).
- Towing Capacity: Limited to small attachments up to 100 lbs (e.g., leaf sweepers, spreaders) on flat ground. Towing on slopes is not recommended.
- Ramp Angle for Loading: Should not exceed 15 degrees when loading onto a trailer or truck using a single, full-width ramp.
- Fuel: Requires specific recommended gasoline.
- Blades: Rotating blades are located under the mower deck.
- Controls: Includes motion control levers with settings for Fast, Slow, Neutral, and Reverse. A parking brake is also present.
- Adjustments: Features for adjusting the height of cut, anti-scalp rollers, and seat position.
Usage Features:
- Operation Controls: The manual details the use of various controls, including starting and stopping the engine, operating the blades, and using the parking brake.
- Driving: Instructions are provided for driving forward or backward, stopping the machine, and adjusting motion control levers.
- Safety Interlock System: The machine incorporates a safety interlock system, which is crucial for preventing operation under unsafe conditions. Operators are warned not to tamper with safety devices.
- Height of Cut Adjustment: Allows operators to adjust the cutting height to suit different grass lengths and preferences.
- Anti-Scalp Rollers: Adjustable rollers help prevent scalping of the lawn on uneven terrain.
- Seat Positioning: The operator's seat can be positioned for comfort and optimal control.
- Manual Pushing: Instructions are included for pushing the machine by hand, likely for non-operational movement or storage.
- Side Discharge: The mower features a side discharge for cut grass.
- Operating Tips: General advice for efficient and safe mowing is provided.
- Pre-Operation Checks: Emphasizes checking the engine oil level and ensuring the deflector or grass catcher is in place before operation.
- Environmental Considerations: The engine exhaust contains carbon monoxide, and the product is subject to California Proposition 65 warnings regarding chemicals known to cause cancer, birth defects, or other reproductive harm. The engine is not equipped with a spark arrester muffler, making its use on forest-covered, brush-covered, or grass-covered land a violation in California and potentially other areas.
Maintenance Features:
- Recommended Maintenance Schedule: A schedule is provided to guide regular maintenance tasks.
- Lubrication: Instructions for greasing various points on the machine, including how to grease and where to add grease.
- Engine Maintenance: Covers servicing the engine oil (checking, changing), air cleaner, and spark plug.
- Fuel System Maintenance: Includes draining the fuel tank and replacing the fuel filter.
- Electrical System Maintenance: Details servicing the battery and fuses.
- Drive System Maintenance: Involves checking tire pressure.
- Mower Maintenance:
- Cutting Blades: Instructions for servicing the cutting blades, emphasizing caution due to their sharpness.
- Mower Leveling: Procedures for leveling the mower from side-to-side and adjusting the front-to-rear blade slope.
- Mower Removal/Installation: Steps for removing and installing the mower deck.
- Belt Inspection/Replacement: Guidance on inspecting and replacing mower belts.
- Grass Deflector: Instructions for replacing the grass deflector.
- Cleaning: Procedures for cleaning the machine, including washing the underside of the mower.
- Storage: Recommendations for proper storage of the mower.
- Troubleshooting: A section dedicated to diagnosing and resolving common issues.
- Schematics: Electrical and other diagrams are included to aid in maintenance and repair.
- Parts and Service: Operators are advised to contact an Authorized Service Dealer or New Holland Customer Service for genuine parts and service, providing the model and serial numbers.
- Safety Decals: Emphasizes the importance of safety and instructional decals, instructing operators to replace any that are damaged or lost.
Need help?
General
To Next Page