What causes slow speed of travel on New Holland E57C?
If you experience slow speed of travel, swing, boom, arm, and bucket, it might be due to a low oil level, so add oil to the specified level.
What to do if the pinion of the starter motor keeps going in and out on New Holland Excavators?
If the pinion of the starter motor keeps going in and out, the battery might not be charged, so charge the battery, or the safety relay may be damaged.
Why is unusual combustion noise or mechanical noise appearing in New Holland Excavators?
If you hear unusual combustion or mechanical noise, it could be due to the wrong fuel, so check with specified fuel; over-heating, so check over-heating; a defect in the muffler; or incorrect valve clearance.
General| Brand | New Holland |
|---|---|
| Model | E57C |
| Category | Excavators |
| Language | English |
Defines the authorized operations for the excavator and prohibits misuse.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE signal words used in the manual.
Covers general safety rules for operating the machine and general maintenance safety.
Provides essential safety precautions when working near buried utility lines.
Explains the importance of safety signs and how to maintain their legibility.
Details the left-hand and right-hand control levers for machine operation.
Details the operation of the safety lock lever and its importance for preventing unexpected movement.
Describes the instrument cluster, including the LCD screen and switches for operation monitoring.
Identifies and explains various warning lights that appear on the instrument cluster.
Details the process of starting the machine, including anti-theft protection setup.
Provides step-by-step instructions and safety warnings for starting the engine.
Covers general operating procedures, site inspection, and warnings about machine damage.
Provides essential safety precautions and operating procedures for working on slopes.
Outlines the procedure to safely lower the attachment if the machine fails.
Details the correct procedure for safely stopping the engine.
Covers general machine travel, including control reversal warnings and travel speed selection.
Details the safe procedure for parking the machine, including securing it.
Provides instructions and warnings for safely towing a disabled machine.
Details the procedure for safely releasing pressure in the hydraulic system.
Provides essential safety precautions to protect the machine's electrical systems during charging or welding.
Provides instructions and safety warnings for starting the engine using booster cables.
Details the procedure for replacing the engine oil and oil filter.
Explains the procedure for manual regeneration of the DPF and related warning lights.
Provides a table of common engine problems, their causes, and solutions.
Offers diagnostic methods for electrical system problems, their causes, and solutions.
Provides diagnostic methods for generic problems in other machine systems.
Provides essential guidelines for selecting, installing, using, and maintaining hydraulic attachments.
Lists essential precautions for operating the hydraulic breaker safely and preventing damage.
Lists essential precautions for operating the hydraulic auger safely and preventing damage.
Details the procedure for engaging an attachment to the quick coupling system.
Details the procedure for disengaging an attachment from the quick coupling system.
Details the procedure for engaging an attachment to the hydraulic quick coupling system.
Covers crucial safety instructions and requirements for load handling operations.
To Next Page
