EasyManua.ls Logo

New Holland E37C - User Manual

New Holland E37C
296 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATOR’S MANUAL
E37C
Mini Excavator
Part number 90436684
1
st
edition English
January 2021
ORIGINAL INSTRUCTIONS

Table of Contents

Other manuals for New Holland E37C

Preview: Service Manual
Service Manual51 pages

Questions and Answers

  • J
    Jordan CookAug 20, 2025
    What to do if steam is emitted from the radiator of New Holland Excavators?
    • A
      Andrew BonillaAug 20, 2025
      If steam is coming from the radiator and the coolant level warning light is on, it could be due to several issues: low coolant level, so supply the coolant and check for leakage; incorrect fan belt tension, so adjust the fan belt tension; a dirty cooling system, so wash out the inside of the cooling system; dirty or damaged radiator fin; a defect on the thermostat; or incorrect tightening torque of the radiator cap, so tighten the radiator cap firmly or replace the packing of it; or a defect in cluster.
  • J
    Janet LopezAug 22, 2025
    What to do if the engine does not start in New Holland E37C?
    • P
      phillipsdanielAug 22, 2025
      If your New Holland Excavator's engine isn't starting, possible causes include a low fuel level, so add fuel; air leaking in the fuel system; a defect or damage in the fuel injection pump or in the nozzle; incorrect valve clearance; or incorrect engine compression pressure.
  • S
    stoneanthonyAug 25, 2025
    Why is exhaust gas occasionally turning black in New Holland Excavators?
    • J
      James ThomasAug 25, 2025
      If the exhaust gas occasionally turns black, the air cleaner element might be dirty or damaged, so clean or replace the air cleaner element; there could be a defect in the nozzle; or wrong engine compression pressure.
  • B
    brownmariahAug 26, 2025
    Why is the hydraulic oil temperature rising excessively in New Holland E37C?
    • J
      Jason BaxterAug 26, 2025
      Excessive hydraulic oil temperature can be caused by a dirty oil cooler, so clean the oil cooler; incorrect fan belt tension, so adjust the fan belt tension; or a low oil level, so add oil to the specified level.
  • H
    harrisjohnAug 27, 2025
    Why is exhaust gas white or blue in New Holland Excavators?
    • D
      Douglas MorenoAug 28, 2025
      If the exhaust gas is white or blue, it could be due to the wrong oil quantity, so adjust to the specified oil quantity, or the wrong fuel, so replace with the specified fuel.
  • H
    Heather BlankenshipAug 29, 2025
    What to do if starter motor turns the engine sluggishly in New Holland E37C Excavators?
    • L
      Larry SextonAug 29, 2025
      If the starter motor turns the engine sluggishly, the battery might not be charged, so charge the battery, or the starter motor may be damaged.
  • I
    ijohnsonAug 31, 2025
    What to do if the starter motor does not turn in New Holland E37C?
    • M
      Melissa WalkerSep 1, 2025
      If the starter motor does not turn when the starter switch is turned to START, it could be due to damaged wiring, a battery that is not charged, so charge the battery, a damaged starter motor, or a damaged safety relay.
  • K
    Kathleen WrightSep 2, 2025
    What to do if unusual noise is emitted from the pump in New Holland E37C Excavators?
    • S
      Scott WilsonSep 2, 2025
      If there's an unusual noise coming from the pump, the hydraulic tank strainer might be clogged or dirty, so clean the hydraulic tank strainer.
  • D
    deckerjoshuaSep 4, 2025
    How to fix track slip out of place on New Holland E37C?
    • M
      Monica SpencerSep 5, 2025
      If the track slips out of place, it might be due to incorrect tension of track, so adjust the tension of the track.
  • J
    Jeanette WaltonSep 7, 2025
    What causes the bucket to rise slowly on New Holland E37C Excavators?
    • K
      Kelly MccannSep 7, 2025
      If the bucket rises slowly or not at all, it could be due to a low oil level, so add oil to the specified level.

Summary

General Information

Note to the Owner

Important preliminary information for the operator regarding machine usage, safety, and manual comprehension.

Product Identification

Details on how to identify machine type, PIN, engine, and component serial numbers for ordering and service.

Machine Components

Identification of key parts of the machine with diagrams and labels for reference.

Emissions Overview

Information on engine emissions warranty, compliance standards, and manufacturer's warranty periods.

Safety Information

Signal Word Definitions

Explanation of DANGER, WARNING, CAUTION, and NOTICE to convey hazard levels and consequences.

General Safety Rules

Essential safety guidelines for operating the machine, including personal and machine safety precautions.

Fire and Explosion Prevention

Precautions to prevent fires and explosions related to fuel, oil, and electrical systems.

Operator Protective Structure

Information on ROPS/FOPS structures and their importance for operator safety in case of accidents.

Safety Signs

Guidance on understanding the purpose, location, and maintenance of safety decals on the machine.

Controls and Instruments

Access to Operators Platform

Instructions for safely entering and exiting the operator's station, including door and step usage.

Operators Seat

Instructions for adjusting the operator's seat for comfort, proper operation, and safety.

Forward Controls

Explanation of how to operate the primary machine controls for movement and attachment functions.

Left-Hand Side Controls

Identification and function of controls located on the left side of the operator's station.

Right-Hand Side Controls

Identification and function of controls located on the right side of the operator's station.

Instrument Cluster

Overview of gauges, warning lights, and pilot lights on the dashboard for monitoring machine status.

Air Conditioning Control

How to operate the fan, temperature, and louvers for the cabin climate control system.

Rearward Controls

Information on controls and compartments located towards the rear of the operator's station.

Exterior Controls

Information on accessing and operating external components like doors, mirrors, and switches.

Operating Instructions

Starting the Unit

Procedures for starting the machine, including anti-theft protection and engine starting.

Starting the Engine

Step-by-step guide for safely starting the machine's engine with pre-start checks.

Bringing the Machine Up to Operating Temperature

Procedure for warming up machine systems for optimal performance and safety before operation.

Operating the Machine on Sloping Ground

Critical safety and operational guidelines for working safely on inclines.

Lowering the Attachment in the Event of a Failure

Procedure to safely lower the attachment if the engine stops unexpectedly.

Bucket Replacement

Step-by-step instructions for safely removing and installing the bucket attachment.

Stopping the Unit

Procedures for safely shutting down the machine's engine and parking.

Moving the Unit

Instructions and precautions for traveling with the machine, including speed selection and alarms.

Parking the Unit

Procedures for safely parking the machine, ensuring it is secured.

Transport Operations

Road Transport

Guidelines for transporting the machine via road, including trailer setup.

Preparing for Road Transport

Steps to take before transporting the machine, including tie-downs and checks.

Unloading the Machine from a Transport Trailer

Procedures for safely unloading the machine from a trailer.

Shipping Transport

General procedures for handling the machine during shipping and transport.

Recovery Transport

Procedures and warnings related to towing a disabled machine.

Maintenance

General Information

Important introductory information and basic instructions for performing maintenance.

Fluids and Lubricants

Specifications and recommended types of fluids and lubricants for the machine.

Releasing Pressure in the Hydraulic System

Procedure to safely release pressure in the hydraulic system before performing service.

Fuel System Bleeding

Steps to remove air from the fuel system after draining or filter replacement.

Maintenance Planning

Overview of maintenance schedules and actions required for the machine.

Break-in Period

Specific maintenance actions required during the initial operating period of the machine.

Every 10 Hours

Maintenance tasks to be performed every 10 operating hours.

Every 50 Hours

Maintenance tasks to be performed every 50 operating hours.

Track Tension

How to check and adjust the tension of the rubber tracks for optimal performance.

Every 500 Hours

Maintenance tasks to be performed every 500 operating hours.

Air Cleaner

Steps for cleaning and replacing the air filter elements.

Every 1000 Hours

Maintenance tasks to be performed every 1000 operating hours.

Every 2000 Hours

Maintenance tasks to be performed every 2000 operating hours.

Fuse and Relay Locations

Information on the location and function of fuses and relays in the electrical system.

Storage

Procedures for preparing the machine for extended storage to prevent damage.

Troubleshooting

Fault Code Resolution

Guidance on diagnosing and resolving common machine problems based on fault codes.

Engine - Troubleshooting

Common engine issues, their possible causes, and corrective actions.

Electrical Systems - Troubleshooting

Common electrical system problems and troubleshooting steps.

Specifications

Machine Specifications

Technical data for the machine's engine, pumps, valves, and cylinders.

Dimensions

Overall dimensions of the machine for both cab and canopy versions.

Working Range

Specifications related to the machine's operational reach and digging capabilities.

Weights

Weight specifications for machine components and different configurations.

Accessories

Direct Fit Buckets

Information on different types of direct fit buckets and their applications with various arms.

Auxiliary Hydraulic Circuits

Details on the machine's auxiliary hydraulic systems and how to select/operate them.

Operation with the Hydraulic Breaker

Procedures and precautions for operating a hydraulic breaker attachment safely.

Operation with the Hydraulic Auger

Procedures and precautions for operating a hydraulic auger attachment safely.

Quick Coupling System - Klac Type

Information on the Klac type quick coupling system and its attachment/disengagement.

Quick Coupling System - Mechanical Pin-Grabber Type

Information on the mechanical pin-grabber quick coupling system and its operation.

Quick Coupling System - Hydraulic Pin-Grabber Type

Information on the hydraulic pin-grabber quick coupling system and its operation.

Load Handling

Critical safety procedures and requirements for handling suspended loads with the machine.

Rotating Beacon

Installation and operation of the rotating beacon for visibility and traffic safety.

Fire Extinguisher

Information on the installation of an emergency fire extinguisher on the machine.

New Holland E37C Specifications

General IconGeneral
BrandNew Holland
ModelE37C
CategoryExcavators
LanguageEnglish

Related product manuals