Do you have a question about the New Holland Electro Command S T5.90 and is the answer not in the manual?
Cylinders | 4 |
---|---|
Displacement | 3.4 L |
Max Speed | 40 km/h |
Hydraulic Remotes | Up to 3 |
Fuel Tank Capacity | 120 L |
Engine Power | 90 hp |
Transmission | Electro Command |
Manual contains adjustment and maintenance info for the new machine. Ensure operators read carefully.
Discusses safety warnings, including Proposition 65 warning for California.
Details product identification and precautions for safe operation and potential risks.
Prohibits tampering with the engine and fuel system due to emissions standards.
CNH America LLC reserves the right to make changes or improvements to products.
Details how to access the operator's platform, including entry/exit and overview.
Covers adjustment and localization of the operator's seat and restraints.
Information regarding the passenger's seat.
Describes the instrument cluster and cab controls identification.
Localization overview of the left-hand console and hand brake operation.
Localization of pillar trim, right-hand panel, air conditioning, and parking lock.
Identification of cab controls located externally.
Information on instrument cluster programming and basic instructions.
Instructions for commissioning the unit, including engine safety and fuel tank filling.
Procedures for starting the engine.
Procedures for stopping the engine and operating the battery isolator.
Instructions for starting and operating the unit while moving.
Covers frame start for road transport.
Instructions for towing and securing the machine during recovery.
Overview of operating controls like FWD engagement and differential lock.
Operation of the power shuttle transmission.
Safety rules for remote control valves.
Covers PTO adjustments, operation, and safety messages.
Safety rules and operating instructions for the rear hydraulic lift.
Covers adjustment and operation of the rear three-point hitch.
Personal safety and localization overview for the towbar.
Safety rules and operating instructions for towing hitches.
General specifications and tire ratios for wheels.
Adjustments for tread, fenders, and related controls on MFD axles.
Safety rules and procedures for ballasting and supports.
Localization overview of electrical systems and power sockets.
General information, safety messages, foreword, and basic instructions for maintenance.
Details the maintenance chart and planning.
Maintenance tasks to be performed as needed, like checks and fillings.
Procedures for cleaning air cleaner and fuel filters.
Engine checks and other daily/hourly maintenance tasks.
Specific maintenance tasks after the first 50 hours of operation.
Maintenance tasks to be performed every 50 hours, like greasing.
Maintenance tasks for every 100 hours, such as cleaning filters and checking belts.
Maintenance tasks for every 300 hours, including filter replacement and checks.
Maintenance tasks for every 600 hours, such as engine and fuel filter replacement.
Maintenance tasks for every 1200 hours or annually, like fluid changes.
Maintenance tasks required every two years, such as receiver-dryer replacement.
Maintenance tasks for every 3600 hours or four years, like radiator fluid change.
Covers battery checks, road light adjustments, and fuse/relay replacement.
Information on fuse and relay box locations and replacement.
Instructions for storing the tractor frame.
Procedures for PTO clutch calibration.
Information on instrument cluster part identification and general specifications for fault codes.
Guides for troubleshooting various systems like engine, electrical, transmission, and hydraulics.
Details frame dimensions.
Capacities related to brakes and controls.
General specifications for the rear three-point hitch.
List of consumables and their capacities.
Details on transmission speeds.
Overall general specifications for the tractor.
Instructions for operating the cab radio set.
Service record for the first 50 hours, owner's copy.
Service record for the first 50 hours, dealer's copy.