Edition 12/2007 87726937A 0 - 25
REPAIR INSTRUCTIONS F106.6 / F106.6A
SAFETY INSTRUCTIONS F156.6 / F156.6A
3.8 Working equipment
PERSONNEL
The assembly operations should be carried out only
b
y operating or maintenance personnel who
possess the required skills.
If the personnel lack the necess
ary skills, they
should be carefully guided by experienced
personnel.
They must have read and und
erstood the operating
instructions, particularly the ‘Basic safety
information’ section.
During the assembly operations, only experienced
pe
rsonnel must be allowed to start the machine in
order to make adjustments to the working tool.
Operator errors with the machine or the working
e
quipment can result in life-threatening situations.
PERSONAL PROTECTIVE EQUIPMENT AND
WORK
CLOTHES
Wear close-fitting work clothes when working with
the
machine. Loose or wide items of clothing can
become caught in machine parts, and thus cause
injuries.
Wear a hard hat, protective shoes and gloves.
TOOLS AND ACCESSORIES
Tools, lifting gear, lifting accessories, support frames
a
nd other equipment must be in a reliable working
condition.
When driving in or removing fastening bolts, metal
sp
linters may fly off and cause injury. Therefore, use
a brass or copper drift for driving in or removing
bolts, and wear safety glasses.
Use only the steps, platforms and handles provided
when getting in or
out.
Keep steps, platforms and handles in a condition
wh
ere they provide a secure grip. Clean them
immediately if they become soiled with oil, grease,
soil, mud, snow, ice, or other matter.
SECURING THE WORKING EQUIP
MENT
Lower the working equipment to the ground, so that
it wil
l not move when mechanical or hydraulic
connections are loosened.
If the machine has to be jacked up, secure the front
ax
le with wedges to prevent swinging.
If working near the articulation, lock
the joint.
Remove all locking and securing devices when the
work is complete.
If work tools or tool parts are to be attached or
remov
ed, or adjusted while in position, they should
be secured with suspension/propping equipment to
prevent unintentional movement, slipping or falling.
SECURING THE MACHINE
Only carry out work on the wo
rking equipment if the
machine has been secured as described in the
section ‘Securing the machine’.
CHOOSING THE WORKING EQUIPMENT
The machine can be equipped with a variety of
wor
king equipment. The components of the working
equipment are made up of hydraulic cylinders and
connecting parts. Various component combinations
are possible in order to adapt the working
equipment optimally to the type of application.
Only use equipment and component combinations
with the
machine, if these have been expressly
approved by the manufacturer for this machine.
Equipment supplied by other manufacturers, to
which EC
machines guideline 89/392 EWG applies,
should only be attached and operated if they carry:
• the manufacturer’s statement of conformity,
• the statement of compatibility.
To Next Page
Loading...
Need help?
General
