• CAUTION the instructions must be followed carefully in the assembly,
use and maintenance of the equipment.
• Assembly: It is important you assemble the product in a clean
and uncluttered space.
• Keep away from fire.
• This product is not a toy. Do not stand or jump on it.
• If the supply cord is damaged, do not use your Fitt Mill.
• Always unplug your Fitt Mill when it is not in use, and before moving or cleaning
the appliance.
• The power cord must not be knotted, twisted, pulled, strained or squeezed.
• Do not touch the power plug or appliance with wet hands while the appliance is
connected to the mains power supply.
• Do not attempt to repair any power cord.
MAINTENANCE AND STORAGE
• Wipe clean only with a clean, damp cloth. DO NOT use detergents.
• This equipment should not be stored outside, in a garage or outbuilding. Keep the
equipment in a dry place with as little temperature variation as possible.
• We recommend placing a mat beneath the equipment to protect
both the equipment and flooring. New Image mat can be purchased
at newimagefitness.co.uk
• The safety level of the equipment can only be maintained if it is regularly examined
for wear and tear. This includes any ropes, pulleys, handles, nuts, bolts, moving
parts, bushes, chains, wheels, bearings and connections.
LUBRICATING THE BELT
• The running belt must be lubricated using silicone oil to ensure smooth operation
and to help belt longevity, it needs to be lubricated as below:
- usage less than 3 hours per week, once every 5 months
- usage 4 – 7 hours per week, once every 2 months
- usage more than 7 hours per week, once a month.
• To apply the silicone oil, lift the running belt and squeeze a small amount of the oil
on the underneath of the belt.
• To ensure an even application across the belt step from left to right on the belt
whilst running it at 1 kmh.
• Do not over lubricate the belt, after lubrication the underneath of the belt should
feel a little damp.
• NEVER let the belt run dry.
13
To Next Page
Loading...