Connect the right pedal to the right
crank arm. Both parts are marked R.
Hold the right pedal with one hand
and screw the pedal bolt onto the
crank arm with the other hand in a
standard clockwise motion. Finish
tightening with the included wrench.
Connect the left pedal to the left
crank arm. Both parts are marked L.
Hold the left pedal with one hand
and screw the pedal bolt onto the
crank arm with the other hand in a
non-standard counterclockwise
motion. Finish tightening with the
included wrench.
The strap marked R goes on the right
pedal. The strap marked L goes on the
left pedal. With the R or L marking facing
upward, attach the end of the strap with
3 holes to the inside of the pedal.
Attach the end of the strap with 4
holes to the outside of the pedal.
Adjust to your preference.
15
ASSEMBLY INSTRUCTIONS
READ THIS SECTION CAREFULLY
RIGHT bolt screws in CLOCKWISE
(standard direction)
R
LEFT bolt screws in COUNTERCLOCKWISE
(NON-standard direction)
L
To Next Page
Loading...
