ASSEMBLY INSTRUCTIONS
Tighten nut onto screw
with included wrench.
Repeat on other side.
Take both nuts and
washers o of front foot
with rollers.
Place the nuts and washers
to the side for now.
Place the washer onto screw. Screw on the nut.
IInstall front foot onto
front main frame leg.
The rollers help to move the bike when it is tilted forward and
should not touch the oor when the bike is in a regular stand-
ing position. When properly installed, the rollers will face
outward from the front of the bike (see images). If the rollers
touch the oor, uninstall the foot, turn around, and reinstall.
8
To Next Page
Loading...
