Tempest Nd:YAG Laser Operator’s Manual
6
addition, there are interlocks designed to interrupt laser operation if the
laser may be damaged. The interrupts are
• Laser head cover opened
• Control panel detached
• Laser head umbilical detached
• Cooling water temperature too high
• Cooling water flow too low
• Remote interlock interrupted (if installed)
The Tempest has an exit beam shutter located on the laser head housing.
The laser beam may be blocked by closing the shutter. Do not use the
exit beam shutter as a method of blocking the beam for more than a few
seconds. Turn off the laser if the output beam is not needed for longer
time periods.
CE Declaration
Declaration of Conformity
Application of Council Directives:
• 73/23/EEC, 89/336/EEC
Standards to which Conformity is Declared:
• EN 61010; EN 60825
• EN 55011; EN 50082
Manufacture's Name and Address:
47613 Warm Springs Blvd.
Fremont CA 94539 USA
Type of Equipment: Nd:YAG Laser Systems
Model Numbers: Tempest, Gemini
Date CE Mark Affixed: 1998
Supplementary Information:
I the undersigned, hereby declare that the equipment specified
above conforms to the above Directives and Standards.
Place: Fremont, CA Date: December 20, 1998
Edward North
President
Exit Shutter
To Next Page
Loading...