EN
www.newair.com 10
3. Plug in the ice maker. The ICE/CLEAN button will light up red.
4. Press the ICE/CLEAN button once and the ice maker will start to make ice.
5. Press the ICE/CLEAN button for 5 seconds and the ice maker will start the self-
cleaning process.
Notes:
• If the ADD WATER indicator light turns on and the machine stops working, the ice
maker does not have enough water to product more ice. Turn off the ice maker,
add water, and turn on the ice maker to restart the ice making process. It may take
the compressor 3 minutes to start up again once the ice maker has been restarted.
• When the ice basket is full of ice, it will automatically stop working. The ICE FULL
indicator light will turn on, and the ICE/CLEAN indicator light will turn white. After
the ice is removed from the ice basket, the ice maker will start working
automatically.
Warning:
• Change the water in the water tank every 24 hours to ensure a good hygiene level.
If you don’t plan on using the ice maker the next day, drain out all the water & dry
the water tank.
To Next Page
Loading...
Need help?
General
