9
3. While the ice maker is on, check the water level periodically. If the water
pump cannot inject water, the ice maker will stop automatically, and the
“ADD WATER” indicator will light up. Press the “ON/OFF” button to turn off
the unit, fill water up to the “MAX” line, and press the “ON/OFF” button
again to resume ice production.
4. The ice maker automatically stops working when the ice basket is full. The
“ICE FULL” indicator will light up once it’s full. To restart ice production,
remove the ice from the tray and press “ON/OFF” again.
5. Change the water in the tank every 24 hours to ensure a reasonable
hygiene level. If the unit is not in use for a few days, drain all the water in
the tank reservoir and refill before operating again.
To Next Page
Loading...
Need help?
General