8
newair.com
OPERATING PROCEDURES
UNPACKING YOUR ICE MAKER
1. Remove all exterior and interior packaging. Make sure that the ice basket
and ice scoop are included. If any part or accessory is missing, please
contact customer service.
2. Clean the interior with lukewarm water and a soft cloth. Remove the ice
basket and wash it in warm water.
3. While the unit is still not plugged in, clean the evaporator rods using a
water/vinegar solution.
4. Find a location for your ice maker that is protected from direct sunlight
and allows for six inches of space between the back and sides of the ice
maker and the wall.
CONNECTING YOUR ICE MAKER
Improper use of the grounded plug can result in the risk of
electrical shock. If the power cord is damaged, please do not
attempt to use the unit. Contact customer service, and we will
help you take care of the issue.
1. This unit should be properly grounded for your safety.
2. Plug the appliance directly into an appropriate 120V AC outlet that is
properly installed and grounded in accordance with all local codes and
ordinances.
USING YOUR ICE MAKER
1. Press the “ON/OFF” button after plugging in the ice maker and it will begin
to run.
2. Open the cover, remove the ice basket, and pour water into the tank.
Make sure it does not surpass the maximum water level. Place the ice
basket back into the unit and close the lid.
To Next Page
Loading...
Need help?
General