NewerTech voyager q User Manual

NEWERTECH VOYAGER Q
INTRODUCTION
2
1.3 TOP VIEW
1. SATA connector
2. Hinged flap for 3.5” drives
3. Drive eject button
4. Power LED (blue)
5. Drive activity LED (red)
6. Power button
1.4 REAR VIEW
1. Power input
2. USB 3.0 (Micro-B) port
3. eSATA 3.0Gb/s port
4. FireWire 400 (1394a) port
5. FireWire 800 (1394b) ports
1 2
3
4
6
5
1
2
3
4 5
1.5 ABOUT THIS MANUAL
Firmware, images, and descriptions may vary slightly between this manual and the unit
shipped. Functions and features may change depending on the firmware version. Please
visit the product webpage for the most recent product specifications.

NewerTech voyager q Specifications

General

Storage media type	HDD
Storage drive interface	Serial ATA III
Maximum storage capacity	4 TB
Storage drive sizes supported	2.5, 3.5 \
Number of storage drives supported	1
DC-in jack	Yes
FireWire 400	FireWire-interface with a data transmission speed of 400 Mbit/s (50MB/s). FireWire is a serial computer bus technology designed as replacement of SCSI and is based on the IEEE 1394 and 1394b standards.
Standard interfaces	eSATA, FireWire 400, FireWire 800, USB 3.2 Gen 1 (3.1 Gen 1)
Chipset	Oxford 944SE
Certification	RoHS, CE
Product color	Black
LED indicators	Activity, Power
Output current	3 A
Output voltage	12 V
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Cables included	eSATA, FireWire, USB

Weight and Dimensions

Depth	134.11 mm
Width	610 mm
Height	93.98 mm
Weight	68.07 g