NewLine NT+ Series - Network Configuration


Select 1HWZRUN to enter the network setting interface. You can view network status
information, set :L)L, (WKHUQHW, +RWVSRWWHWKHULQJ and 3UR[\. Press button on
remote control to return to the upper interface.
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
:L)L:Click the corresponding button to enable the Wi-Fi function.
(WKHUQHW: When the RJ45 port is properly connected to the network cable, click
the corresponding button to enable the Ethernet function. The user can customize
settings to automatically obtain an IP address of the LAN or set a static IP address
as needed.
3UR[\: Click the item to view proxy server.
+RWVSRW WHWKHULQJ: The user can customize relevant settings for portable Wi-Fi
hotspot.
1HWZRUNLQIR: Click to view network status and operation time.
:DNHRQ/$1: Click the corresponding button to enable :DNHRQ/$1 function.
Select /DQJXDJH to enter the setting interface of language. You can set /DQJXDJH,
9LUWXDO.H\ERDUG and SRLQWHUVSHHG in this interface. Press button on remote
control to return to the upper interface.
◆
1HWZRUN
◆
/DQJXDJH