NewLine Q Series - 4.14 System Settings

65
4.13 Automatically Power Off
If the screen is left un-operated for a specified duration, it will be locked to guarantee your privacy.
Choose Settings> Power Setting to set the duration. For details on the setting method, see "Power
Setting".
After the screen is locked, if it is operated again within 120 seconds, the screen is unlocked.
Otherwise, the screen enters the power off mode.
4.14 System Settings
Enter the system setting page using one of the following methods:
⚫
Tap on the Home page.
⚫
Press on the remote control.
⚫
In the Quick Setting Menu, tap the icon.
4.14.1 Network Settings
Enter the Network submenu to enable Wi-Fi or Ethernet, view network information, and
enable the Wake on LAN function.
⚫
Wi-Fi: Tap the corresponding button to enable the Wi-Fi function.
⚫
Ethernet: When the RJ45 port is properly connected to the network cable, tap the
corresponding button to enable the Ethernet function. User can View the MAC address,
IP address, gateway, subnet mask, and DNS information. The user can customize settings
to automatically obtain an IP address of the LAN or set a static IP address as needed.
⚫
Hotspot & tethering: The user can customize relevant settings for portable Wi-Fi
hotspot.