75
When Writing Mode Filter is on, the display will change whiteboard brightness under
writing mode. When Brightness Mode Filter is on, the display will change screen brightness
based on ambient light. When Bluelight filter is on, the filter level tints your screen abmer,
this makes it easier to look at your screen or read in light.
Note:
Studies have shown that just as the ultra-violet rays can cause eye damage, the shortwave-length blue light
rays from displays can cause eyestrain, retina damage, and affect vision over time. Newline Blue Light filter is
an eye protection feature that can reduce the blue light. TT-6521Q /TT-7521Q /TT-8621Q has obtained this
certification.
For protecting your eyes against prolonged display use, we highly recommend you to do the
following:
Let your eyes rest for 10 minutes after 2 hours of continues use.
Roll your eyes upward towards your eyebrows, and then roll your eyes in a large circle
every few hours.
For every 20 minutes of display viewing, look into the distance for 20 seconds.
When your eyes get sore, close your eyes for a minute.
Using Low Blue Light
Decreasing the blue light emitting by the Interactive Flat panel display reduces the blue light
exposure to your eyes.
The Interactive Flat panel display use a low blue light panel default setting mode, that when
used in the default setting mode, is certified by TUV to reduce blue light output and create a
more relaxing and less stimulating image while reading content on the screen.
The hardware solution was developed to control the blue light range emission. Instead of
reducing the total blue range, the selected range reduction does not impact CCT and display
color. It exposes users to less blue light emission while letting them enjoy good color on the
display.
To Next Page
Loading...
