What to do if Newlong Industrial Equipment leaks oil from ?C?
If your Newlong Industrial Equipment is leaking oil from point ?C, the cause might be a loose plug. Try tightening the plug. If the leak persists, replace the lubricator.
What to do if Newlong Industrial Equipment leaks oil from ?A?
If oil is leaking from point ?A on your Newlong Industrial Equipment, it may be due to a worn-out or displaced seal of the O-Ring. The suggested solution is to replace the lubricator.
What to do if Newlong Industrial Equipment leaks oil from ?B?
If you notice an oil leak from point ?B on your Newlong Industrial Equipment, the issue is likely a worn-out or displaced seal of the packing. The solution is to replace the lubricator.
Why is the button on my Newlong Industrial Equipment not returning?
The button on your Newlong Industrial Equipment might not be returning due to accumulated dust or a broken spring. To resolve this, replace the lubricator.
General| Stitch Type | Single thread chain stitch |
|---|---|
| Needle Type | DNx1 #25 |
| Type | Portable bag closer |
| Power Supply | 220V |
| Speed | 1, 700 stitches per minute |
To Next Page
