What to do if Newlong Industrial Equipment leaks oil from ?C?
If your Newlong Industrial Equipment is leaking oil from point ?C, the cause might be a loose plug. Try tightening the plug. If the leak persists, replace the lubricator.
What to do if Newlong Industrial Equipment leaks oil from ?A?
If oil is leaking from point ?A on your Newlong Industrial Equipment, it may be due to a worn-out or displaced seal of the O-Ring. The suggested solution is to replace the lubricator.
General| Type | Portable Bag Closer |
|---|---|
| Stitch Type | Single Thread Chainstitch |
| Needle | DNx1 #25 |
| Motor Power | 90W |
| Thread | Synthetic thread or cotton thread |
To Next Page
