Why are there dark or light spots on my Newskill Monitor when I turn it on?
If you notice dark or light spots on your Newskill Monitor when you first turn it on, don't worry. This happens because the backlight isn't lighting up evenly due to temperature differences. After about 20 minutes, the backlight should work normally, and those spots will disappear.
How to fix image distortion, blinking, or shaking on Newskill Monitor?
If your Newskill Monitor's image is distorted, blinking, or shaking, the solution is to check your computer settings. Make sure you've selected the correct resolution and then readjust the refresh frequency.
What to do if my Newskill Monitor display is overheating?
If your Newskill Monitor display is overheating, ensure there's at least 5cm of free space around it for ventilation. Also, avoid placing anything on top of the display to allow for proper airflow.
How to brighten the image on my Newskill Monitor?
If the image on your Newskill Monitor appears too dark, go to the "Brightness and Contrast" menu to adjust the display's brightness and contrast until the image looks right.
To Next Page
General
