TriCaster
®
Mini
s/n 000000000000000
Registration
1. Find the 15 character serial
number label on the
TriCaster
®
Mini unit
2. Use one of the Gigabit
Ethernet Network Connectors
on the unit to make an active
internet connection
3. Be sure a display, keyboard
and mouse are connected to
the unit
4. Press the Power Switch on the
unit
5. Once the unit nishes
powering up, the End User
License Agreement appears.
Review the agreement, then
click “I Accept” to continue
7. The User Info screen now
appears. Fill out the information
and when complete, click OK
6. The Register TriCaster
®
screen
now appears. Type in the 15
character serial number
and click “Continue”
8. After conrmation with the
NewTek registration service, the
system user interface appears.
Before using the system,
please go to
https://www.newtek.com/
downloads/
to download and install the
latest version of software.
9. Clicking on the New Session
box is the rst step to creating
your show. Yay!
Before you go...
If you would like a bit of help
to get started, check out the
downloadable video tutorials that
show the most common features
you use to make your show. It’s all
right here
https://new.tk/tcmQSGV
One Last Cool Thing to Do
Before You Start!
Download the FREE iOS camera
app. Once you’ve installed the
app on your phone, you have a 4K
camera right in your pocket. Get it
here http://new.tk/TCNDIHXCAM
NX-001946-0001, Rev.05
TC-mini-QSG-Spark-plus-4k-NX-001946-0001, Rev.05.indd 4TC-mini-QSG-Spark-plus-4k-NX-001946-0001, Rev.05.indd 4 8/6/2020 4:20:41 PM8/6/2020 4:20:41 PM
To Previous Page
Loading...
Need help?
General
