EasyManua.ls Logo

NewTek TriCaster TCXD300 - User Manual

NewTek TriCaster TCXD300
290 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the NewTek TriCaster TCXD300 and is the answer not in the manual?

Summary

2 INTRODUCTION

2.4.1 A;V INPUT AND OUTPUT

Details TriCaster's capabilities for live switching between SDI and analog HD or SD cameras.

2.4.4 THE SWITCHER

Explains the three-row switcher for hot-punching between various video sources.

2.4.7 RECORD AND STREAM

Covers recording live-switched productions and streaming to the internet.

2.4.10 KEYING, VIRTUAL SETS AND VIRTUAL INPUTS

Covers LiveMatte keying technology and LiveSet virtual set technology.

3 SETTING UP

3.1 COMMAND AND CONTROL

Guides on connecting monitors, mouse, and keyboard for system control.

3.4 INPUT CONNECTIONS

Explains how to connect external audio and video sources to the TriCaster.

3.4.1 CONNECT A;V SOURCES

Details connecting SDI, Component, Y/C, and Composite video sources.

3.5 GENLOCK CONNECTION

Describes the Genlock input for synchronizing equipment in the video chain.

3.5.1 GENLOCK CONNECTION

Explains connecting a house sync or reference signal to the Genlock input.

3.6 OUTPUT CONNECTIONS

Details the video and audio output connectors and options for display.

3.6.1 A;V OUTPUT

Covers simultaneous program output to SD/HD and Analog/Digital devices.

3.6.3 CONNECTING DEVICES

Guides on connecting downstream video devices to the VIDEO OUT section.

3.6.4 VGA OUTPUT

Describes connecting a secondary monitor or projector via VGA.

3.8 STARTING A SESSION

Guides on powering up TriCaster and navigating to the Startup Screen.

3.9 CONFIGURE VIDEO OUTPUT

Explains how to configure video output monitoring on the Live Desktop.

3.9.2 CONFIGURE VGA OUTPUT

Guides on setting VGA output resolution and screen layout for secondary displays.

3.10 CONFIGURE VIDEO INPUT

Explains how to configure connected video sources in the Live Desktop.

3.11 CONFIGURE AUDIO

Details audio setup and control features in the Audio tab.

3.12 CONFIGURE GENLOCK

Guides on configuring Genlock settings in the Output Configuration panel.

4 LIVE PRODUCTION WALKTHROUGH

4.1 CREATING A SESSION

Guides on starting new TriCaster sessions and configuring devices.

4.2 IMPORTING CONTENT

Details how to import media files for use in TriCaster productions.

4.3 MONITORING

Explains the monitoring features of the Live Desktop, including Program Output.

4.4 AUDIO MIXER

Explores features in the Audio tab, including Mute, Mono, and Balance.

4.5 NETWORK SOURCES

Covers using network-connected computer displays as TriCaster sources.

4.5.1 IVGA CLIENTS

Guides on installing and using the iVGA client for Windows and OS X.

4.6 SWITCHING

Explores basic Switcher operations, including selecting sources on rows.

4.6.1 SWITCHER ROWS

Details the Effects, Program, and Preview rows of the TriCaster Switcher.

4.6.2 TRANSITIONS

Explains how to use transitions to swap video streams between Program and Preview.

4.7 RECORD AND GRAB

Covers capturing video clips and still images from Program Output.

4.7.1 RECORD

Guides on recording the program output as a file for archiving or clips.

4.7.2 GRAB

Explains capturing a fresh still image from Program Output.

4.8 MEDIA PLAYERS

Introduces TriCaster's DDR, Stills, and Titles media players.

4.8.1 DDR

Details the Digital Disk Recorder (DDR) media player functionality.

4.9 OVERLAY

Explains how to superimpose content over Program Output using Overlay channels.

4.10 LIVEMATTE

Demonstrates using LiveMatte for chromakeying effects like a weather report.

4.11 VIRTUAL INPUTS

Introduces Virtual Inputs for multi-source compositions and LiveSet integration.

4.11.1 COMPOSING INPUTS A AND B

Guides on composing sources into Virtual Inputs for foreground and background.

4.11.3 LIVESET

Covers TriCaster's virtual set technology, LiveSet, for studio environments.

4.12 STREAMING

Details sending TriCaster output to the internet via streaming.

4.12.1 STREAMING CONFIGURATION

Guides on configuring stream type, profiles, and network settings.

4.12.2 SIMPLE PULL STREAMING

Explains the simplest method of getting production online via Pull streaming.

4.12.3 PUSH AND FLASH STREAMING

Covers Push and Flash streaming methods for wider audience distribution.

5 THE STARTUP SCREEN

5.2.1 NEW (SESSION)

Guides on creating a new session, designating video standard and format.

5.2.2 OPEN (SESSION)

Explains how to open existing sessions and navigate the Sessions List.

7 DESKTOP MONITORS

7.1 PROGRAM OUTPUT

Describes the Program Output monitor's importance and associated controls.

7.2 ALL MONITORS TAB

Covers viewing ISO monitors for video inputs, DDR, Stills, Titles, and Network sources.

7.2.2 INTERACTIVE CONTROL

Explains how ISO monitors can be used for interactive Switcher operations.

8 I;O CONFIGURATION

8.1 OUTPUT CONFIGURATION

Details the Output Configuration panel for controlling video signal at output stages.

8.1.1 SEPARATE OUTPUT CONTROLS

Explains tabbed panes for Program, VGA, and Genlock output controls.

8.1.2 PROC AMP

Details Proc Amp adjustments for brightness, contrast, hue, and saturation.

8.1.4 VGA OUTPUT

Explains the purpose and configuration of TriCaster's VGA output.

8.1.5 GENLOCK

Describes the Genlock feature for locking video output to a reference signal.

8.2 INPUT CONFIGURATION

Details the Input Configuration panels for sources like Camera 1-3.

8.2.1 CONNECTION TYPE

Lists available connection types for camera inputs (e.g., Component, SDI).

8.2.2 PROC AMP

Explains Proc Amp settings applied to individual video inputs.

8.2.3 LIVEMATTE

Details configuration of TriCaster's realtime keying system, LiveMatte.

9 NETWORK SOURCES

9.1 IVGA

Guides on installing and using the iVGA client for network sources.

9.1.1 IVGA FOR OS X

Details iVGA installation for Apple OS X systems.

9.1.2 IVGA FOR WINDOWS

Provides instructions for iVGA installation on Microsoft Windows systems.

10 STREAMING

10.1 TRICASTER STREAMING

Covers TriCaster's support for Adobe Flash and Microsoft Windows Media streaming.

10.1.1 PULL PROFILES

Explains the Pull streaming method for internal or limited audiences.

10.1.2 PUSH AND FLASH STREAMING

Details Push and Flash streaming protocols for wider distribution.

10.4 CONFIGURATION AND TROUBLESHOOTING

Addresses potential teething problems in video streaming and configuration.

10.4.1 TESTING YOUR STREAM

Emphasizes the importance of onsite testing for live streams.

11 RECORD AND GRAB

11.1.1 RECORD

Guides on capturing program output as a file for the system or DDR.

11.2 GRAB

Explains the Grab function for capturing a still image from Program Output.

12 SWITCHER, TRANSITIONS AND OVERLAY

12.1 SWITCHER ROWS

Details the Effects, Program, and Preview rows of the TriCaster Switcher.

12.2 TRANSITIONS

Explains various controls for swapping video streams using digital effects.

12.2.1 TAKE AND TRANSITION

Covers the Take button for straight cuts and Transition for digital video effects.

12.3 OVERLAY

Details the Overlay panel for superimposing imagery on video streams.

12.3.1 TWO CHANNELS

Explains control over two overlay (downstream keyer) channels.

13 DDR, STILLS AND TITLES

14 LIVEMATTE

14.1 CHROMAKEYING

Explains chromakeying as a method for combining images using a key color.

15 VIRTUAL INPUTS

15.1 PRIMARY VIDEO SOURCES

Explains Virtual Inputs supporting two primary video sources: Input A and Input B.

15.4 LIVESET

Covers LiveSet for achieving studio settings within small spaces.

16 AUDIO

16.1.1 INPUT 1

Covers control for Input 1, including analog and digital audio connections.

17 SPEEDEDIT AND LIVETEXT

17.1 SPEEDEDIT

Introduces SpeedEDIT for pre and post-production video editing.

A HOW DO I …?

Connect cameras?

Guides on connecting video sources to TriCaster's BNC input connectors.

Connect monitors?

Details connecting computer monitors and secondary displays via DVI or VGA.

Initiate Streaming?

Provides steps to connect to the internet and start streaming.

Record my Program?

Details steps to configure and start recording the program output.

Import Media Files?

Guides on importing media files into TriCaster session folders.

C VIDEO CALIBRATION

C.2.1 SETTING BLACK AND WHITE

Guides on calibrating black and white levels using IRE units and a waveform monitor.

C.3.3 SETTING BLACK AND WHITE

Details setting black and white levels using NTSC and PAL color bars.

Summary

2 INTRODUCTION

2.4.1 A;V INPUT AND OUTPUT

Details TriCaster's capabilities for live switching between SDI and analog HD or SD cameras.

2.4.4 THE SWITCHER

Explains the three-row switcher for hot-punching between various video sources.

2.4.7 RECORD AND STREAM

Covers recording live-switched productions and streaming to the internet.

2.4.10 KEYING, VIRTUAL SETS AND VIRTUAL INPUTS

Covers LiveMatte keying technology and LiveSet virtual set technology.

3 SETTING UP

3.1 COMMAND AND CONTROL

Guides on connecting monitors, mouse, and keyboard for system control.

3.4 INPUT CONNECTIONS

Explains how to connect external audio and video sources to the TriCaster.

3.4.1 CONNECT A;V SOURCES

Details connecting SDI, Component, Y/C, and Composite video sources.

3.5 GENLOCK CONNECTION

Describes the Genlock input for synchronizing equipment in the video chain.

3.5.1 GENLOCK CONNECTION

Explains connecting a house sync or reference signal to the Genlock input.

3.6 OUTPUT CONNECTIONS

Details the video and audio output connectors and options for display.

3.6.1 A;V OUTPUT

Covers simultaneous program output to SD/HD and Analog/Digital devices.

3.6.3 CONNECTING DEVICES

Guides on connecting downstream video devices to the VIDEO OUT section.

3.6.4 VGA OUTPUT

Describes connecting a secondary monitor or projector via VGA.

3.8 STARTING A SESSION

Guides on powering up TriCaster and navigating to the Startup Screen.

3.9 CONFIGURE VIDEO OUTPUT

Explains how to configure video output monitoring on the Live Desktop.

3.9.2 CONFIGURE VGA OUTPUT

Guides on setting VGA output resolution and screen layout for secondary displays.

3.10 CONFIGURE VIDEO INPUT

Explains how to configure connected video sources in the Live Desktop.

3.11 CONFIGURE AUDIO

Details audio setup and control features in the Audio tab.

3.12 CONFIGURE GENLOCK

Guides on configuring Genlock settings in the Output Configuration panel.

4 LIVE PRODUCTION WALKTHROUGH

4.1 CREATING A SESSION

Guides on starting new TriCaster sessions and configuring devices.

4.2 IMPORTING CONTENT

Details how to import media files for use in TriCaster productions.

4.3 MONITORING

Explains the monitoring features of the Live Desktop, including Program Output.

4.4 AUDIO MIXER

Explores features in the Audio tab, including Mute, Mono, and Balance.

4.5 NETWORK SOURCES

Covers using network-connected computer displays as TriCaster sources.

4.5.1 IVGA CLIENTS

Guides on installing and using the iVGA client for Windows and OS X.

4.6 SWITCHING

Explores basic Switcher operations, including selecting sources on rows.

4.6.1 SWITCHER ROWS

Details the Effects, Program, and Preview rows of the TriCaster Switcher.

4.6.2 TRANSITIONS

Explains how to use transitions to swap video streams between Program and Preview.

4.7 RECORD AND GRAB

Covers capturing video clips and still images from Program Output.

4.7.1 RECORD

Guides on recording the program output as a file for archiving or clips.

4.7.2 GRAB

Explains capturing a fresh still image from Program Output.

4.8 MEDIA PLAYERS

Introduces TriCaster's DDR, Stills, and Titles media players.

4.8.1 DDR

Details the Digital Disk Recorder (DDR) media player functionality.

4.9 OVERLAY

Explains how to superimpose content over Program Output using Overlay channels.

4.10 LIVEMATTE

Demonstrates using LiveMatte for chromakeying effects like a weather report.

4.11 VIRTUAL INPUTS

Introduces Virtual Inputs for multi-source compositions and LiveSet integration.

4.11.1 COMPOSING INPUTS A AND B

Guides on composing sources into Virtual Inputs for foreground and background.

4.11.3 LIVESET

Covers TriCaster's virtual set technology, LiveSet, for studio environments.

4.12 STREAMING

Details sending TriCaster output to the internet via streaming.

4.12.1 STREAMING CONFIGURATION

Guides on configuring stream type, profiles, and network settings.

4.12.2 SIMPLE PULL STREAMING

Explains the simplest method of getting production online via Pull streaming.

4.12.3 PUSH AND FLASH STREAMING

Covers Push and Flash streaming methods for wider audience distribution.

5 THE STARTUP SCREEN

5.2.1 NEW (SESSION)

Guides on creating a new session, designating video standard and format.

5.2.2 OPEN (SESSION)

Explains how to open existing sessions and navigate the Sessions List.

7 DESKTOP MONITORS

7.1 PROGRAM OUTPUT

Describes the Program Output monitor's importance and associated controls.

7.2 ALL MONITORS TAB

Covers viewing ISO monitors for video inputs, DDR, Stills, Titles, and Network sources.

7.2.2 INTERACTIVE CONTROL

Explains how ISO monitors can be used for interactive Switcher operations.

8 I;O CONFIGURATION

8.1 OUTPUT CONFIGURATION

Details the Output Configuration panel for controlling video signal at output stages.

8.1.1 SEPARATE OUTPUT CONTROLS

Explains tabbed panes for Program, VGA, and Genlock output controls.

8.1.2 PROC AMP

Details Proc Amp adjustments for brightness, contrast, hue, and saturation.

8.1.4 VGA OUTPUT

Explains the purpose and configuration of TriCaster's VGA output.

8.1.5 GENLOCK

Describes the Genlock feature for locking video output to a reference signal.

8.2 INPUT CONFIGURATION

Details the Input Configuration panels for sources like Camera 1-3.

8.2.1 CONNECTION TYPE

Lists available connection types for camera inputs (e.g., Component, SDI).

8.2.2 PROC AMP

Explains Proc Amp settings applied to individual video inputs.

8.2.3 LIVEMATTE

Details configuration of TriCaster's realtime keying system, LiveMatte.

9 NETWORK SOURCES

9.1 IVGA

Guides on installing and using the iVGA client for network sources.

9.1.1 IVGA FOR OS X

Details iVGA installation for Apple OS X systems.

9.1.2 IVGA FOR WINDOWS

Provides instructions for iVGA installation on Microsoft Windows systems.

10 STREAMING

10.1 TRICASTER STREAMING

Covers TriCaster's support for Adobe Flash and Microsoft Windows Media streaming.

10.1.1 PULL PROFILES

Explains the Pull streaming method for internal or limited audiences.

10.1.2 PUSH AND FLASH STREAMING

Details Push and Flash streaming protocols for wider distribution.

10.4 CONFIGURATION AND TROUBLESHOOTING

Addresses potential teething problems in video streaming and configuration.

10.4.1 TESTING YOUR STREAM

Emphasizes the importance of onsite testing for live streams.

11 RECORD AND GRAB

11.1.1 RECORD

Guides on capturing program output as a file for the system or DDR.

11.2 GRAB

Explains the Grab function for capturing a still image from Program Output.

12 SWITCHER, TRANSITIONS AND OVERLAY

12.1 SWITCHER ROWS

Details the Effects, Program, and Preview rows of the TriCaster Switcher.

12.2 TRANSITIONS

Explains various controls for swapping video streams using digital effects.

12.2.1 TAKE AND TRANSITION

Covers the Take button for straight cuts and Transition for digital video effects.

12.3 OVERLAY

Details the Overlay panel for superimposing imagery on video streams.

12.3.1 TWO CHANNELS

Explains control over two overlay (downstream keyer) channels.

13 DDR, STILLS AND TITLES

14 LIVEMATTE

14.1 CHROMAKEYING

Explains chromakeying as a method for combining images using a key color.

15 VIRTUAL INPUTS

15.1 PRIMARY VIDEO SOURCES

Explains Virtual Inputs supporting two primary video sources: Input A and Input B.

15.4 LIVESET

Covers LiveSet for achieving studio settings within small spaces.

16 AUDIO

16.1.1 INPUT 1

Covers control for Input 1, including analog and digital audio connections.

17 SPEEDEDIT AND LIVETEXT

17.1 SPEEDEDIT

Introduces SpeedEDIT for pre and post-production video editing.

A HOW DO I …?

Connect cameras?

Guides on connecting video sources to TriCaster's BNC input connectors.

Connect monitors?

Details connecting computer monitors and secondary displays via DVI or VGA.

Initiate Streaming?

Provides steps to connect to the internet and start streaming.

Record my Program?

Details steps to configure and start recording the program output.

Import Media Files?

Guides on importing media files into TriCaster session folders.

C VIDEO CALIBRATION

C.2.1 SETTING BLACK AND WHITE

Guides on calibrating black and white levels using IRE units and a waveform monitor.

C.3.3 SETTING BLACK AND WHITE

Details setting black and white levels using NTSC and PAL color bars.

NewTek TriCaster TCXD300 Specifications

General IconGeneral
BrandNewTek
ModelTriCaster TCXD300
CategoryRecording Equipment
LanguageEnglish

Related product manuals