EasyManua.ls Logo

Nexcom PEAK 735 Series User Manual

Nexcom PEAK 735 Series
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Nexcom PEAK 735 Series and is the answer not in the manual?

Nexcom PEAK 735 Series Specifications

General IconGeneral
BrandNexcom
ModelPEAK 735 Series
CategoryMotherboard
LanguageEnglish

Summary

Chapter 1 General Information

1.1 Features

Lists key features of the PEAK 735 Series SBC, including processor, memory, VGA, LAN, SATA, USB.

1.2 Specifications

Details system architecture, CPU support, main memory, and BIOS specifications.

Chapter 2 Jumper & Switch Settings

2.1 Functions of Jumpers

Defines the function of various connectors and jumpers on the board.

2.2 Setting Jumpers

Explains how to correctly set 2-pin and 3-pin jumpers (Open/Short).

2.4 Jumper Setting

Provides tables for device select, DDR VDDQ, AT/ATX power, and RTC clear jumper configurations.

2.5 Connector Pin Definition

Details pin definitions for AC'97, IDE, SATA, USB, FDD, and other connectors.

Chapter 3 Expanded Capabilities

3.1 System Memory

Explains system memory provided by DIMMs and lists configuration options.

3.2 Installing DIMM

Provides step-by-step instructions and diagrams for installing DIMM modules.

3.3 Changing CPU

Details the procedure for safely removing and installing a CPU.

3.4 Installing the Fan Heatsink

Step-by-step guide for mounting the CPU fan heatsink assembly.

Chapter 4 Award BIOS Setup

4.1 Entering Setup

Describes methods to enter the BIOS setup utility upon system startup.

4.5 Standard CMOS Features

Covers configuration of date, time, and IDE devices.

Chapter 5 Driver Installation

Appendix A: Watchdog Timer Setting

Related product manuals