To Next PageTo Next PageHow to fix Nexgrill 820-0015 Grill that will not light?
If your Nexgrill grill won't light, start by checking if the liquid propane cylinder is empty. Also, inspect the burner ports for any blockages and clear them using a soft wire brush. Finally, check the gas orifice on the burner for obstructions, cleaning it with a needle or thin wire if necessary. Never use a wooden toothpick.
Why is my Nexgrill Grill not getting hot enough?
If your Nexgrill grill has low heat even when the control knob is set to “HI”, ensure the grill area is clear of dust and that the burner and orifice are clean. Check for any spiders or insects that may be causing a blockage. Also, verify that there is an adequate gas supply available and that the grill is being preheated for 15 minutes.
Information on spiders and insects nesting in burners and blocking gas flow.
Instructions for connecting the gas supply to the grill.
Specifications and guidelines for using a 20-lb propane cylinder.
Step-by-step guide for connecting the propane cylinder to the regulator.
Procedure for safely disconnecting the propane cylinder from the grill.
Instructions for checking gas connections for leaks before and during use.
Final checks to ensure proper installation and safety of the grill.
Step-by-step guide for safely lighting the grill burners.
Procedure for safely shutting down the grill after use.
How to identify and correct burner flame issues.
Guidelines and suggestions for cooking with the grill.
Safe procedures for moving the grill after use and cooling.
General