Assembly Instruction
STEP 1. Attach Pole with Support
Bracket
● Put the Pole with Support Bracket
into the Tank hole.
● Secure the Pole with 4 pcs the 1/4”
Flat Washers, 1/4” Lock Washers and
1/4” Nuts
STEP 2. Secure the Granite Table
● Align the cut out portion of the
Granite Table Rubber Ring with the
openings in the Granite Table Support
Bracket
● Align the screw holes in the
underside of the Granite Table with the
holes in the Granite Table Support
Bracket. Using 2 - 1/4” x 15mm Truss
Head Screw, attach the Granite Table
to the Granite Table Support Bracket as
shown in the diagram to the left.
5
To Next Page
