Step 1: Place the rear camera:
Mount the rear camera above the rear license plate.
(Recommended for: Most Passenger Vehicles)
Step 1 (Cont.): Rear Camera Installation Instructions:
1. Locate the included double-sided tape strip. Remove one
side of the double-sided tape's backing. Adhere the double-
sided tape to the bracket as shown in the image below.
2. Remove the other side of the double-sided tape's backing.
Secure the rear camera above the rear license plate pointing
outward. Alternatively, you can hard mount the rear camera
Rear camera
Device
20
To Next Page
Loading...