WHY IS MY UNIT NOT TURNING ON?
Ensure the power cable is firmly and fully connected.
Make sure the socket of your vehicle's auxiliary power outlet
is clean and free of corrosion or other damages.
Make sure the power cable is firmly and fully seated in the
auxiliary power outlet.
Check to make sure the car fuse for the auxiliary power
outlet has not been tripped.
WHY ARE ALL OF THE RECORDED VIDEOS BLURRY?
Please ensure both front and rear camera lenses are clean
and free from smudges. Use a cleaning fluid approved for
cleaning lenses and a microfiber cloth.
Ensure that you have removed the protective film off the lens.
Make sure the windshield around the camera lens is clean
and free of dirt and debris both inside and outside of the
vehicle.
WHY DOES THE DASHCAM CONTINUOUSLY DISPLAY "NO
SD CARD!"
Option 1: Verify that a Micro SD card is fully inserted into the
device.
Option 2: If this error message is still showing, first try
formatting the Micro SD card again, if that does not work
replace the Micro SD card.
HOW DO I FORMAT THE MICRO SD CARD?
Option 1: In the NexiGo Dashcam menu navigate to Settings >
Format SD Card.
26
To Next Page
Loading...