Note: Do not insert or remove the Micro SD card while it is
saving or reading data. The data may be damaged or lost.
Only insert or remove the Micro SD card when the Dashcam
is turned off.
THE SCREEN DOESN'T SHOW THE REVERSING ASSISTANT
LINE WHEN THE VEHICLE IS REVERSING.
Ensure that the red trigger wire on the rear camera extension
cable is correctly tied to the reverse light wiring as described
in the installation section.
Please ensure all connections to the rear camera are plugged
in securely and reboot the device. If it still does not work,
please contact us at cs@nexigo.com at any time for further
assistance.
WHAT CAN I DO IF THE TOUCHSCREEN IS NOT WORKING
PROPERLY?
Turn off the Dashcam by pressing and holding the power
button for ten seconds. Press it again to turn the unit back on.
HOW DO I TRANSFER FILES FROM THE DASHCAM TO MY
COMPUTER?
Turn off the Dashcam and remove the Micro SD card from the
device. Using a card reader, insert the Micro SD card into your
computer. You can then transfer files from the Micro SD card
onto your computer.
Option 2: Using a computer or laptop, follow the instructions
provided by the operating system manufacturer to format a
disk.
27
To Next Page
Loading...