Need help?Do you have a question about the Nexo PS15 and is the answer not in the manual?
General| Impedance | 8 ohms |
|---|---|
| Drivers | 15" LF, 2" HF |
| Type | 2-way passive speaker |
| Power Handling | 500W RMS |
| Dimensions | 675 mm x 434 mm x 368 mm |
| Weight | 28 kg |
| Recommended Amplifier Power | 500 to 1000 W |
| Connectors | 2 x NL4 |
| Woofer | 15" |
| Tweeter | 2" |
| Inputs | 2 x NL4 |
| Nominal Coverage | 50° - 100° horizontal x 55° vertical |
| HF Dispersion | 50° - 100° Horizontal x 55° Vertical (Rotatable) |
Standards for TDcontrollers, including electrical safety and emissions.
Standards for PSAmps, covering safety, emissions, and immunity.
Electromagnetic compatibility standards for PS and LS cabinets.
Critical safety information for TDcontroller power sockets and electrical hazards.
Introduces the PS8, PS10, and PS15 loudspeaker systems and their subwoofers.
Details the passive and bi-amped operational modes for the PS15 speaker.
Provides initial instructions for setting up the loudspeaker systems.
Explains the role and usage of TDcontrollers for PS8, PS10, PS15, and NX241 systems.
Notes on TDcontroller interchangeability and PS15TD compatibility.
Instructions for connecting and using the PS15Bass subwoofer.
Details standard Speakon connectors and wiring for cabinets.
Wiring configurations for PS systems in passive mode using Speakon connectors.
Wiring configurations for PS15 systems in active mode.
Guide to choosing correct cable sections based on impedance and length.
Recommended gradual power ramp-up for new loudspeaker components.
Advises on wiring sequence for system components, including amplifiers and TDcontrollers.
Explains the asymmetrical dispersion horn feature of the PS Series.
Details horn dispersion patterns and how to adjust horn orientation.
Specific horn orientation for front-of-house audience coverage.
Horn orientation for use as a stage monitor wedge.
Procedure for switching the PS15 between active and passive modes.
Steps to modify the PS15 connector plate for active/passive mode.
Guidelines for positioning, grouping, and flying subwoofers for optimal performance.
Explains the ICN feature in PS15 cabinets and its compatibility.
Essential safety precautions when handling and installing accessories.
Information on using stands, masts, and U-couplers for speaker mounting.
Details on flying rails and rings for PS10 and PS15 cabinets.
Table showing vertical angles based on flying ring position for PS10/PS15.
Notes on using Omnimount® clamps with PS10 and PS15 cabinets.
Description of specific mounting accessories for the PS8 cabinet.
Contents and use of the SA0081-001 safety accessory kit.
Procedures for checking and maintaining internal fuses in PS10 and PS15 cabinets.
Explains how a blown fuse affects sound quality and component protection.
Details fuse types and locations for PS10, PS15, and ICN circuits.
Basic approach to diagnosing system faults by segmenting components.
Identifies common cabinet faults like vibrations, air leaks, and internal component issues.
Outlines Nexo's warranty coverage, limitations, and claim procedures.
Introduces the PS8TD, PS10, and PS15MK2 analogue TDcontrollers.
Describes main functions like system response optimization and frequency band splitting.
Highlights features such as stereo operation, individual gain control, and protection facilities.
Details compatibility between PS15TD MK2 and older PS15TD, LS1000, and LS1200.
Describes the layout and indicators on the TDcontroller front panel.
Explains the LSub button function for overlap/crossover and sub output.
Details the LSub level potentiometer and its calibration.
Explains the Sense, Peak, VLF, LF, and HF LEDs for monitoring system status.
Describes the 12 dB range trimmers for setting L&R gain in active mode.
Adjusting protection trimmer and peak limiter for amplifier and speaker protection.
Adjusting the Low Frequencies shelving filter for PS and LSub.
Details the female XLR connectors for balanced and unbalanced audio inputs.
Specific wiring instructions for connecting unbalanced sources to preserve polarity.
Describes the male XLR outputs for System L, System R, and Sub L+R.
Wiring procedures for balanced and unbalanced amplifier inputs.
Explains the Earth Lift switch function for eliminating hum.
Using the 3-position output level switch for gain matching and protection.
How sense inputs connect to amplifier outputs for servo-control.
Diagram and table detailing sense input terminal connections.
Location and function of the voltage selector on PS15TD.
Warning regarding fuse replacement when changing voltage settings.
Information on PS15 fuse replacement and mains socket earthing.
Instructions for setting the 9 red jumpers for active or passive mode.
Instructions for setting blue jumpers J1 & J6 for ICN compatibility.
Setting ICN and Sub jumpers for cabinet compatibility and mono summation.
Recommendations for sense line wiring, cross-talk prevention, and amplifier protection.
Guidelines for connecting multiple amplifiers to TDcontroller outputs.
Explains subsonic, VHF filtering, and acoustical response equalization.
Details the crossover filters for PS and LSub channels.
Describes servo control principles, sense inputs, and fallback operation.
Explains voltage controlled amplifiers and equalizers used in servo control.
Operation of wide band VCA and dynamic equalizer for signal processing.
Mechanisms for protecting drivers from displacement and overheating.
Benefits of the peak limiter for maintaining sound quality and reliability.
Introduces PS8Amp/PS10Amp, their integration with TDcontrollers, and key features.
Details balanced line inputs, chaining connectors, and L&R link switch.
Explains Speakon connector configuration for 3-amp or 2-amp channel modes.
How the LSub On switch reconfigures the PSAmp for subwoofer operation.
Describes the main Level and LSub Level controls for adjusting output volume.
Covers mains voltage selection, safety fuses, and mains connection.
Nexo's recommendation for selecting high-power amplifiers for optimal system performance.
Importance of knowing amplifier gain, variations, and tolerance for system alignment.
Step-by-step guide to measure amplifier gain using a signal generator.
Recommends a +26dB gain level for improved signal-to-noise ratio.
Advises disabling amplifier-specific limiter or compressor functions.
Comprehensive technical data for PS8, PS8TD, and LS400 systems.
Notes on using TDcontroller with PS8/LS400 and HF horn dispersion.
Details features of PS8, LS400, and PS8 TDController components.
Information on packaging, shipping weight, and available accessories.
Diagrams and measurements for PS8, PS8TD, and LS400 cabinets.
Graphs showing on-axis frequency response and total distortion for PS8.
Charts detailing impedance curves and off-axis frequency responses for PS8.
Polar plots illustrating dispersion patterns and coverage angles for PS8.
Data on directivity index and factor for PS8 based on response measurements.
Technical specifications for PS10, PS10TD, and LS500 systems.
Notes on TDcontroller usage with PS10/LS500 and HF horn dispersion.
Details features of PS10, LS500, and PS10 TDController components.
Information on packaging, shipping weight, and available accessories.
Diagrams and measurements for PS10, PS10TD, and LS500 cabinets.
Graphs showing on-axis frequency response and total distortion for PS10.
Charts detailing impedance curves and off-axis frequency responses for PS10.
Polar plots illustrating dispersion patterns and coverage angles for PS10.
Data on directivity index and factor for PS10 based on response measurements.
Technical specifications for PS15, PS15Bass, and LS1200 systems.
Notes on TDcontroller usage with PS15/LS1200 and HF horn dispersion.
Details features of PS15, LS1200, and PS15 TDController MK2 components.
Details the components, dimensions, and connectors of the PS15Bass.
Technical specifications for the PS15 TDcontroller MK2.
Information on shipping weight, packaging, and dimensions for PS15 series.
Graphs showing on-axis frequency response and total distortion for PS15.
Charts detailing impedance curves and off-axis frequency responses for PS15.
Polar plots illustrating dispersion patterns and coverage angles for PS15.
Data on directivity index and factor for PS15 based on response measurements.
To Next Page
