Nexo PS8 Quick Start Guide

- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 2 OF 4
Dimensions:
Adapter mounting
• Remove 2 screws from the PS8 and use the 2 screws and
the 2 washers provided to fix the adapter.
• Please, do not push on the 2 screws while screwing
them, to avoid disengaging the bolt that is inside the
cabinet.
• WARNING: Screws must be secured using Loctite 243
TM
Tilt in vertical position

Nexo PS8 Specifications

General

Nominal Impedance	8 Ohms
Power Handling	200 Watts RMS
Connectors	2 x NL4
Type	Passive
Woofer	8"
Tweeter	1"
Recommended Amplifiers	100 W - 400 W at 8 ohms
Components	1 x 8" woofer, 1 x 1" tweeter