Do you have a question about the Nexo PS8 and is the answer not in the manual?
Nominal Impedance | 8 Ohms |
---|---|
Power Handling | 200 Watts RMS |
Connectors | 2 x NL4 |
Type | Passive |
Woofer | 8" |
Tweeter | 1" |
Recommended Amplifiers | 100 W - 400 W at 8 ohms |
Components | 1 x 8" woofer, 1 x 1" tweeter |
Details compliance standards and essential safety warnings for NEXO PS Series equipment.
Introduces the PS Series loudspeakers, general setup, and TDcontroller usage.
Covers horn design, active/passive modes, sub bass, ICN, and accessories.
Guidance on maintenance, fuse checks, troubleshooting common issues, and warranty.
Covers essential pre-use info, compatibility, and front/rear panel descriptions.
Explains TDcontroller adjustments, output levels, sense inputs, and setup advice.
Details linear section, servo control, dynamic functions, and block diagrams.
Introduces the PS8Amp and PS10Amp power amplifiers and their integration.
Discusses amplifier selection, power, current rating, and gain settings.
Detailed technical specs, response, impedance, and directivity data for the PS8.
Detailed technical specs, response, impedance, and directivity data for the PS10.
Detailed technical specs, response, impedance, and directivity data for the PS15.
Illustrates typical wiring configurations for various system setups.