Need help?Do you have a question about the Nexo LS500 and is the answer not in the manual?
Details European and international standards for TDcontrollers regarding EMC and safety.
Lists European and international standards for PSAmps regarding EMC and safety.
Specifies compliance with European and international standards for PS and LS cabinets.
Provides critical safety warnings and precautions for TDcontrollers.
Provides an overview of the NEXO PS Series speaker systems.
Emphasizes the critical role of the TDcontroller for system performance and setup.
Details the integration and connection of the PS15Bass passive cabinet.
Explains the Speakon connector wiring and diagram for cabinet connections.
Recommends a gradual power ramp-up for new cabinets to stabilize components.
Details the asymmetrical horn's design and how to adjust its dispersion for various applications.
Explains the modifications needed to switch the PS15 between active and passive modes.
Provides recommendations for positioning and using optional sub bass units.
Explains the ICN feature and its compatibility with PS15 cabinets.
Covers safety recommendations and installation for various speaker system accessories.
Details the use of Omnimount clamps for cabinet installation.
Describes accessories specifically designed for the PS8 cabinet.
Details the procedure for checking and replacing internal fuses in PS10 and PS15 cabinets.
Provides user-guided steps for diagnosing and resolving common cabinet issues.
Outlines warranty coverage and maintenance responsibilities for NEXO products.
Essential reading before use, covering TDcontroller functions and system optimization.
Discusses compatibility with older PS15TD, LS1000, and PS15 cabinets.
Describes the controls and indicators located on the TDcontroller's front panel.
Explains how to turn on the LSub channel and its crossover functions for PS15.
Details how to adjust the relative level of the Sub-bass channel.
Explains the function of Sense and Peak LEDs for amplifier status.
Describes the LEDs indicating temperature or displacement protection activation.
Details how to adjust the gain for the PS15TD controller's channels.
Explains the adjustment of protection trimmers and peak limiters.
Describes the Active/Power LED and the Low Frequency EQ adjustment.
Explains the audio input connectors and wiring for balanced and unbalanced sources.
Describes the audio output connectors for system and subbass signals.
Explains the three-position output level switch for gain matching and protection.
Details the connection and critical role of sense inputs for servo-control.
Explains the purpose of the Earth Lift button for hum reduction.
Describes the voltage selector and its impact on fuse requirements.
Covers functions requiring access to the TDcontroller's internal components.
Details how to set jumpers for switching between active and passive modes.
Explains the correct jumper settings for PS15 cabinets with ICN.
Describes the J4 jumper setting for the sub channel's mono summation.
Provides recommendations for setting up the system and wiring sense lines.
Offers advice on connecting audio outputs to amplifiers, considering load impedance.
Details the linear section, including subsonic, VHF filtering, and equalization.
Explains the crossover filtering for main and subbass channels.
Describes the servo control system and its fall-back operation mode.
Explains voltage controlled elements and dynamic control features.
Details the displacement and temperature control mechanisms for speaker protection.
Discusses the peak limiter's role in maintaining sound quality and reliability.
Presents the electronic block diagram for the PS15TD MK2 controller.
Shows the electronic block diagram for the PS8TD and PS10TD controllers.
Details the features, integration with TDcontrollers, and configuration of PSAmps.
Explains the input connectors and chaining capabilities of the PSAmps.
Describes the automatic configuration of Speakon outputs and LED indicators.
Details the reconfiguration of the PSAmp for sub bass operation.
Explains the overall Level and LSub Level controls on the amplifier.
Offers advice on selecting high power amplifiers and their importance for protection.
Explains amplifier current rating and provides a listening test method.
Stresses the importance of knowing amplifier voltage gain for system alignment.
Recommends specific gain levels for improved signal-to-noise ratio.
Advises disabling amplifier functions that may conflict with the TDcontroller.
Lists comprehensive technical specifications for PS8, PS8TD, and LS400.
Details system operation, controller matching, and dispersion.
Outlines the physical and electrical features of PS8, PS8TD, and LS400.
Information on packaging, shipping weight, and accessories for PS8 and LS400.
Provides physical dimensions for the PS8, PS8TD, and LS400.
Presents detailed performance curves for the PS8 speaker.
Lists comprehensive technical specifications for PS10, PS10TD, and LS500.
Details system operation and controller matching for the PS10 series.
Outlines the physical and electrical features of PS10, PS10TD, and LS500.
Information on packaging, shipping weight, and accessories for PS10 and LS500.
Provides physical dimensions for the PS10 and LS500.
Presents detailed performance curves for the PS10 speaker.
Illustrates various connection configurations for PS10, LS500, and TD controllers.
Lists comprehensive technical specifications for PS15, PS15TD MK2, PS15Bass, and LS1200.
Details system operation and controller matching for the PS15 series.
Outlines the physical and electrical features of PS15, PS15TD MK2, PS15Bass, and LS1200.
Information on packaging, shipping weight, and accessories for PS15 and LS1200.
Provides physical dimensions for the PS15Bass.
Presents detailed performance curves for the PS15 speaker.
Illustrates various connection configurations for PS15, PS15Bass, LS1200, and TD controllers.
To Next Page
General
