Nexo PS8 Quick Start Guide

- Read this document before using.
- Keep this document.
- Observe all warnings and cautions.
PAGE 3 OF 4
Tilt in horizontal position
Adapter / Arm mounting
For the wall mount of VNI-WS8, please select screws and mounting location supporting 4 times the system
weight.
Tighten well to cancel any float between the arm and the adapter.

Nexo PS8 Specifications

General

Nominal Impedance	8 Ohms
Power Handling	200 Watts RMS
Connectors	2 x NL4
Type	Passive
Woofer	8"
Tweeter	1"
Recommended Amplifiers	100 W - 400 W at 8 ohms
Components	1 x 8" woofer, 1 x 1" tweeter