Screen Definition
Voltage
Winter Mode
Summer Mode
Temperature
Battery Capacity
Current
Charging Modes
Desulphation stage: break down sulphation occurring in
batteries that have been left flat for extended periods of time.
Charging process completed.
Pulse repair mode, uses high and low-frequency pulse
voltage and current to increase battery life.
The charger completed the charging process and in trickle
charging and monitoring status.
Battery voltage is too low or can not hold up the charge.
An automatic battery test is conducted immediately after the
absorption stage.
Reverse Connection/ Battery Failure /Bad Connection
between charger and battery.
End of repair function stage.
OFF
PUL
FUL
DES
lou
end
eto
EN - 4
To Next Page
Loading...
