7
-
70 mm mini
12 mm
CAUTION:
A hard-wired drill is connected to the mains, i.e. to
220 V, which is dangerous and strictly prohibited in
this situaon.
3. Assembling the roller
3.1 Necessary tools
-
3.2 Make the inventory compared to the order
Warning: at each step check that the roller can be
installed horizontally on a level and square.
Cauon, if you have rounded corners that require
ng a rear shelf, you should start by xing the
rear shelf (see § 3.2.9).
Drilling the walls
-
To Next Page