Next Stella A03213 - User Manual

The device described in this manual is the Stella Sofabed, a piece of furniture designed for both seating and sleeping. It is produced by Next Retail Ltd. in China.

Function Description

The Stella Sofabed serves a dual purpose: it functions as a sofa for seating and can be transformed into a bed for sleeping. The transformation process involves a mechanical folding mechanism that allows the backrest to be adjusted between an upright sofa position and a flat bed position.

Important Technical Specifications

• Actual Product Size (Sofa Configuration):
  • Height (H): 79 cm
  • Width (W): 190 cm
  • Depth (D): 95 cm
• Actual Product Size (Bed Configuration):
  • Width (W): 190 cm
  • Depth (D): 112 cm
  • Height (H): 38 cm
• Main Component (A): 1900 x 1120 x 180 mm (likely the main body/mattress)
• Legs (B): 200 mm in length (4 pieces)
• Screws (C): M8 x 30 mm (16 pieces)
• Allen Key (D): M5 (1 piece)
• Composition: 100% Polyester for both available color options.
• Color Options:
  • Opulent Velvet Dark GREY (Item A03213)
  • Opulent Velvet Dark DNVY (Item 704792)
• Assembly Time: Approximately 30 minutes.
• Required Personnel for Assembly: Two persons.

Usage Features

• Color Check: Before unpacking fully, users are advised to check the color of the first component to ensure satisfaction.
• Protective Packaging: The packaging should be used to protect surfaces during assembly to prevent scratches.
• Parts Verification: Users must double-check all parts against the provided "parts page" in the instructions before starting assembly.
• Assembly Process:
  1. Fittings and legs are located on the underside of the main sofa component (A).
  2. The legs (B) are installed using the provided screws (C) and Allen key (D). Specific attention should be paid to the direction of leg installation as illustrated.
• Transformation to Sofa:
  1. Pull the back of the sofabed forward until a "CLICK" is heard, indicating the first lock has engaged.
  2. Slowly rest the back until it settles into the upright 100° sofa position.
• Transformation to Bed:
  1. Pull the back of the sofabed forward until another "CLICK" is heard, indicating the lock has disengaged.
  2. Slowly lower the back until it rests flat in the 70° bed position.
• Safety Warnings for Transformation:
  • Keep hands and objects clear from moving parts during operation.
  • The folding mechanism is not to be used by children.
• General Usage Warnings:
  • The product should only be used on firm, level ground.
  • Periodically check and re-tighten all fittings.
  • Do not stand or lean back on the furniture.
  • Avoid exposing the furniture to excessive heat or direct sunlight to prevent color deterioration.
  • Keep away from strong heat sources.
  • Do not use if components are missing or broken.
  • Be aware of moving parts and keep fingers away to avoid injury.

Maintenance Features

• Cleaning:
  • For general cleaning, lightly wipe with a slightly dampened cloth. Always wipe dry after cleaning.
  • For velvet items, use a soft brush to lightly dress the fabric. Lightly wipe with a slightly dampened cloth to clean.
  • Avoid scratching velvet fabric, as the pile may not recover and could be permanently marked.
• Do's for Maintenance:
  • Retain instructions for future reference.
  • Ensure all fixings are fully tightened and remain tight.
• Don'ts for Maintenance:
  • When moving, never drag the furniture across the floor to prevent damage to joints or the floor itself.
  • Do not apply adhesive substrates (e.g., sticky tape) to the product.
  • Do not use silicone-based furniture polish, as it can break down the lacquer finish.
  • Never allow any liquid to remain on the furniture, as absorption can cause finishes to delaminate or stain.

Returns and Support

• Returns Process: If not completely satisfied, ensure all components are returned in their original protective packaging. This includes:
  • Checking all parts are present (using the 'parts page' as a checklist).
  • Placing all loose fittings and fixtures into the provided packaging or a plastic bag.
  • Wrapping all big components back in their original protective packaging.
  • Closing and securely sealing the box (using plenty of tape).
  • Do not return assembled items; all components must be dismantled and separately packed.
  • Do not put loose fixtures and fittings directly into the box without proper containment.
  • Do not throw items carelessly into the box, as they may get damaged.
  • Contact customer service at 0333 777 8999 to arrange a pick-up time.
• Missing Parts: Contact customer service at 0333 777 8999 for free replacements.
• Faulty Products/Home Service: Contact customer service at 0333 777 8999.
  • For products 28 days old or less, a replacement, refund, or visit from a fully trained home service technician may be offered.
  • For products older than 28 days, an independent home service technician will review and repair the product and recommend further action.
• Contact Address: Home Customer Services, Next Retail Ltd, Desford Road, Leicester, LE19 4AT.
• Online Information: Visit www.next.co.uk to view the full furniture range.