EasyManua.ls Logo

Next SPARKLE User Manual

Next SPARKLE
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Tools Needed
Helpline
If you have any problems with this product please contact
Customer Services Tel: 0844 844 8999
• Assemble this product close to the required position in the room to reduce handling.
• All assembly fittings should always be tightened properly.
• This product contains 5 mm annealed mirror glass.
• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Avoid keeping furniture in direct sunlight or close to any heat source as this can cause cracking, discoloration or warping.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Do not place very hot or very cold items against or in proximity to mirror surface.
• Do not strike the glass with hard or pointed items.
• This item contains glass. Please handle with extreme care.
• This item contains glass. Please handle with extreme care.
• BS 7449: 1991.
• Batch No.:2012/03
• This product contains 5 mm annealed glass. If the glass is chipped or broken replace with glass of the type described. Consult the
manufacturer, retailer or agent with regard to obtaining a manufacturing specification and shape for replacement glass quoting the model
number and batch number or date of manufacture.
PRODUCT INFORMATION
• Made from MDF and mirror glass
• Made in China
CARE INSTRUCTIONS
FITTINGS
GLASS INFORMATION
ASSEMBLY INSTRUCTIONS.
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty. Should
you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by step instructions.
• Carefully check that you have all the parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from construction area.
• Wall fixing are not included.
• We recommend that the packaging is used to protect the surfaces during assembly.
SPARKLE TRIPLE CABINET
Question and Answer IconNeed help?

Do you have a question about the Next SPARKLE and is the answer not in the manual?

Next SPARKLE Specifications

General IconGeneral
BrandNext
ModelSPARKLE
CategoryIndoor Furnishing
LanguageEnglish

Summary

Product Information and Safety

Product Helpline and Support

Contact customer services for assistance with product issues or assembly problems.

Key Assembly Precautions

Read through instructions, check parts, keep fittings away from children.

Cabinet Material and Origin

Made from MDF and mirror glass, manufactured in China.

Cleaning and Glass Safety

Gentle cleaning advice, avoid direct sunlight, handle glass with extreme care.

Assembly Instructions

Initial Panel Connection

Attach two panels (3) to panel (4) as per the diagram.

Adding Dowels and Side Panels

Insert wooden dowels (E) and attach panels (1 & 2) to panels (3).

Securing Panels with Screws

Insert four screws (A) into panels (1 & 2) using a screwdriver to tighten.

Attaching Shelf Supports

Insert dowels (E) and cambolts (C) into panel (5) and attach to unit.

Camlocks and Back Panel Installation

Insert camlocks (D), screw (A) into panel (5), and slide back panel (6).

Attaching Top Panel

Insert dowels (E), cambolts (C) into panel (7) and attach to unit.

Internal Panel Securing

Insert four camlocks (D) into panels (1 & 2) using a screwdriver.

Attaching Side Cabinet Door

Attach panel (8) to panel (2) with six screws (B).

Hinge Attachment to Door

Attach two hinges (F) to panel (9) with four screws (B).

Door Mounting and Adjustment

Attach panel (9) to panel (4) with screws (B) and adjust door alignment.

Final Cabinet Assembly

Attach panel (10) to panel (1) and cover holes with stickers (G).

Wall Mounting Instructions

Wall Fixing Preparation

Use template to mark wall, check levelness with spirit level.

Drilling and Wall Plug Insertion

Drill four holes, insert appropriate wall plugs and screws.

Cabinet Hanging and Securing

Lift cabinet, hook fixing clips onto screw threads securely.

Wall Fixing Safety Warning

Ensure no hidden wires/pipes; use suitable fixings for wall type.

Related product manuals