Next SPARKLE - Attaching Shelf Supports; Camlocks and Back Panel Installation; Attaching Top Panel

1. Insert wooden dowels (E) into panel 5 as shown.
3. Attach panel 5 to the assembled unit as shown.
3. Slide panel 6 into the back panel grooves as shown.
1. Insert wooden dowels (E) into panel 7.
STEP FOUR
STEP FIVE
STEP SIX
2. Insert 4 x cambolts (C) into panel 5 using a screwdriver
to tighten.
1. Insert 4 x camlocks (D) into panel 1 & 2 using a
screwdriver to tighten.
2. Insert 4 x cambolts (C) into panel 7 using a screwdriver
to tighten.
3. Turn the panel 7 upside down and attach panel 7 to the
assembled unit.
2. Insert screw (A) into panel 5 by using a screwdriver to
tighten.
4. Insert screw (A) into panel 7 using a screwdriver to
tighten.