Next SPARKLE - Assembly Instructions; Initial Panel Connection; Adding Dowels and Side Panels; Securing Panels with Screws

1. Attach 2 x panels 3 to panel 4 as shown in the diagram.
1. Insert 4 x wooden dowels (E) into 2 x panels 3.
2. Attach panels 1 & 2 to 2 x panels 3 as shown.
STEP TWO
STEP THREE
1. Insert 4 x screws (A) into panels 1 & 2 using a
screwdriver to tighten.
PARTS
STEP ONE