Nextar I4-BC - Using an Address as a Destination

- 10 -
Using an address as a destination
When you use an address for a destination, you must know at
least the name of the street and the city. Guidance directions will be more accurate if
you also know the street number of the destination.
Note: If you already have a destination, you can tap New to set a new destination.
There are two ways to enter the address: by selecting the street first, or be
selecting the city first. If you use Street First and too many records match, you will
be asked to use City First.
To enter an address as a destination using Street First:
1. Tap MENU. The main menu appears.
2. Tap Destination. The Set Destination screen appears.
3. Tap Address. The Input Method screen appears.
4. If you need to change the region:
s Tap Change State. The Enter State Name screen
appears.
s Tap the letters to enter the name of the region, or tap
the name of the region.
s Tap OK when you have selected the region. You return
to the Input Method screen.