Nextar P3 Software Manual

There are three options for displaying POI icons. If you choose default, the most
commonly displayed categories of POI icons will appear on the map at zoom
levels of 1000 ft and closer. If you choose off, no POI icons are displayed. If you
choose custom, you can choose which categories of POI icons you want
displayed.
The color settings control the background color of the map. You can choose
from four different colors.
The 3D view settings control your view of the map. 2D shows you the map in
traditional 2D mode. 1, 2, and 3 show you a 3D version of the map, with a
different angle for each value. If you use any of the 3D settings you will not be
able to tap on a location to view location information.
Angle 1
Angle 2
Angle 3
To set your display settings:
1. Tap MENU to enter main menu.
2. Tap Display Options. The Display Options screen
appears.
3. Tap your Orientation preference: Heading or North.
4. Tap your Guidance preference: Auto or Manual.
5. Tap your Day/Night preference: Auto, Night, or Day.
6. Tap your POI Icons preference: Default, Off, or Custom.
 When you tap Custom the POI Options screen
appears.
 Tap on the categories you want displayed. The
categories to be displayed are highlighted. You
can use Select All and Clear All to quickly highlight
or clear categories.
 When you have highlighted the categories you
want displayed, tap OK. You return to the Display
Options screen.
7. Tap your Color preference: Yellow, Grey, White, or Fuchsia.
8. Tap your 3D View preference: 2D, 1, 2, or 3.
9. When you have finished choosing your options, tap OK.
Route options
The route options give you control over the appearance of the map. You can
change the following:
 method
 ferries
 toll roads
 carpool
 turns

Nextar P3 Specifications

General

Brand	Nextar
Model	P3
Category	GPS
Language	English