Nextar P3 Software Manual

To view location information:
1. To view information about a location on the map, press firmly on the map.
The address information screen appears.
2. Tap Information. The Information screen appears, giving you block
information about the location, including latitude and longitude.
To view POI information:
1. To view information about a POI on the map, press firmly on the icon on the
map. The POI(S) screen appears.
2. Tap Information. The Information screen appears, giving you block
information about the location, including latitude and longitude.
Planning your route
You can set a destination with the system many different ways. Once you have
set a destination, you can add a detour or a stopover.
The system also offers an Itinerary feature, where you can enter up to 50
destinations and use the Itinerary screen to move the addresses into any order
you like.
Setting the home address
To enter your home address:
1. Tap MENU. The main menu appears.
2. Tap Set button next to the Home button.
3. Enter your street name, followed by your street number
4. Select the match
5. Tap Save as Home button
6. Tap on OK to confirm
7. Tap on HOME to quick computer the route to your home.
Setting a single destination
You can set your destination the following ways:
 Address
 Intersection
 Point of Interest (POI)
 Favorites
 Recent
 City Center
When you have found your destination, you have several options:
 Nav
 Fav
 Map
Nav calculates the route from your current location (or the location you set as a
starting point) to the destination.
Fav adds the destination to your Favorites list. Your Favorites list is a list of
locations that you can add destinations to. You can also enter a name for a
destination and delete destinations from the list.
Map displays the location on the panning map without calculating a route.

Nextar P3 Specifications

General

Brand	Nextar
Model	P3
Category	GPS
Language	English