Need help?Do you have a question about the Nextech LA9038 and is the answer not in the manual?
Lists essential features such as easy installation, global frequency band, fast GPS, dual mode, microphone, open protocol, G-sensor, power saving, and app support.
Details the procedure for powering the tracker on/off using the switch and understanding LED status lights.
Explains the correct method for inserting a Micro SIM card into the tracker's designated slot.
Describes connecting the tracker to the vehicle's 9-40V DC power supply for continuous operation.
Explains the wiring and relay setup for the remote engine cut-off feature using the yellow wire.
Guides on setting the APN, username, and password via SMS for internet connectivity.
Covers backup battery functions and power down/removal alarm notifications.
Details how to reset the tracker's settings to the factory default state via SMS.
Specifies the recommended working and storage temperature ranges for optimal tracker performance.
Outlines essential preparation steps including SIM card, power connection, and LED signal checks.
Details sending SMS commands to obtain the tracker's current location.
Explains how to arm and disarm the shock alarm feature using SMS commands.
Covers SMS commands for listening to surroundings and remotely controlling the car engine.
Guides on setting APN, username, and password via SMS if auto-configuration fails.
Explains how to find the tracker's ID and its relation to platform login details.
Covers setting the server IP address and managing authorized phone numbers for alerts.
Details changing passwords and configuring alarm notifications via call or SMS.
Explains setting upload intervals and checking current tracker status and configuration.
Covers GPRS mode settings and procedures for resetting the tracker to factory defaults.
Lists essential features such as easy installation, global frequency band, fast GPS, dual mode, microphone, open protocol, G-sensor, power saving, and app support.
Details the procedure for powering the tracker on/off using the switch and understanding LED status lights.
Explains the correct method for inserting a Micro SIM card into the tracker's designated slot.
Describes connecting the tracker to the vehicle's 9-40V DC power supply for continuous operation.
Explains the wiring and relay setup for the remote engine cut-off feature using the yellow wire.
Guides on setting the APN, username, and password via SMS for internet connectivity.
Covers backup battery functions and power down/removal alarm notifications.
Details how to reset the tracker's settings to the factory default state via SMS.
Specifies the recommended working and storage temperature ranges for optimal tracker performance.
Outlines essential preparation steps including SIM card, power connection, and LED signal checks.
Details sending SMS commands to obtain the tracker's current location.
Explains how to arm and disarm the shock alarm feature using SMS commands.
Covers SMS commands for listening to surroundings and remotely controlling the car engine.
Guides on setting APN, username, and password via SMS if auto-configuration fails.
Explains how to find the tracker's ID and its relation to platform login details.
Covers setting the server IP address and managing authorized phone numbers for alerts.
Details changing passwords and configuring alarm notifications via call or SMS.
Explains setting upload intervals and checking current tracker status and configuration.
Covers GPRS mode settings and procedures for resetting the tracker to factory defaults.
To Next Page
General